Quick Start Guide

FR
EN
IT
Antenna configuration (DVB-T)
In this step, a channel range is displayed with the signal levels of the channels so you can
align the DVB-T antenna to ensure optimal reception.
The “channel search / ISIPRO” appears immediately if DVB-T has been disabled.
> Use the up/down arrow keys to highlight the Antenna supply field and confirm
by pressing the OK button.
> Switch the antenna feed on and off using the up/down arrow keys to highlight to
relevant input and confirm with OK.
> To get to the next step of the installation, use the arrow keys to highlight the
Accept field and confirm with the OK button.
Network configuration
In this step the TV automatically checks the network configuration.
> If you do not want to run the network configuration check, press the Info button.
> If you want to change the network settings, press the Option button and proceed as
described in point 10.4.1 and 10.4.2 of the operating manual, then confirm using the
green function button to apply the settings.
> After the network check has been successfully completed, press the OK button to
move to the next step.
18