Quick Start Guide

38
FR
EN
IT
> During playback press the Fast forward or Rewind button. The message uu or
tt appears in the aforementioned small infobox. The film is now played back at 4x
speed, in the chosen direction.
> If you press the Fast forward or Fast rewind button again, the speed will increase
to 16x and the message uuu or ttt appears.
> If you press the Fast forward or Fast rewind button again, the speed will increase
to 64x and the message uuuu or tttt appears.
> By pressing the Fast forward or Fast rewind button you can jump forwards or
backwards in 10 minute increments.
> When you get to the place you want in the recording, you can return to normal playing
mode by pressing the Pause / Play button.
7.2.4 Jogshuttle function
> During playback press the Jogshuttle (freeze frame) button to switch to Jogshuttle
mode.
Playback of the recording is paused (freeze frame) and “uII” appears in the Infobox.
> If the right/left arrow keys are pressed a number of times you can change the
speed and direction of playback in accordance with the displays and speeds shown
above.
> Pressing the up arrow key or the down arrow key causes the next frame
forwards or backwards to be shown.
7.2.5 Skipping to tags
You have the option of going directly to the points at which you have set markers as per point
8.1.4, 8.2.5, 9.1.3.2 or 9.5.4 of the operating manual.
> Using the Option selection function, select the corresponding marker under
Marker to jump to the desired point in the recording.
7.2.6 Ending playback
> Press the Stop button to stop playback.
Playback is ended and your television reverts to TV mode. In doing so the television
"notices" the place in the recording where playback ended. If you start playing this
recording back again, it will automatically resume at the point where you previously left
off.