Quick Start Guide

FR
EN
IT
27
6.5 Receiving encrypted channels
> Insert a CI-/CI+ module into the slot with the top facing to the back and insert the
Smartcard into the card slot in the CI-/CI+ module, with the golden chip to the rear and
pointing in the direction of insertion
or
> Insert the Smartcard into the device’s card reader with the golden chip to the front and
pointing in the direction of insertion.
When doing this you should also observe point 7.5 of the operating manual.
6.5.1 Smartcard PIN code
With encrypted channels, programmes that are not suitable for children can be blocked by
means of a parental control code/symbol. To unblock the specific programme it is necessary
to enter the smartcard PIN code stored on the smartcard.
> To release the programme, use the numeric keypad to enter the 4-digit
smartcard PIN code.
6.6 Volume control
After switching on the television, sound is produced according to the power-on volume set
using the sound settings menu (section 10.2.1 in the instruction manual).
> To adjust the volume of your TV, press Volume + to increase the volume, and
Volume - to decrease it.
6.6.1 Using mute
> To switch the sound off (mute), press the Sound on/off button - press the key again
to switch the sound back on.
6.6.2 Headphone volume
> While the sound is muted it is possible to operate the Volume + and Volume -
rocker keys to adjust the headphones volume.
6.7 Selecting a different language / sound option
For some channels you have the option of selecting a different sound option (Dolby Digital,
Stereo or Audio Channel 1 or Audio Channel 2) or another language.
> Using the Options selection feature you can select the language/sound option you
want via the Sound option.
When doing so please also note section 7.7 in the instruction manual.
6.8 Sound mode
Via the sound mode selection you can switch between the Neutral, Film, Music and
Speech sound modes, directly during operation.
> You can select the sound you want using the sound mode item in the Options
selection.