Operation Manual

- 35 -
Direct: If you have a single receiver with a direct
connection to the satellite dishes, select the antenna
type Direct. Afterwards choose an available satellite and
press OK to scan for services.
Unicable: If you have multiple receivers and an unicable
system,select the antennatype Unicable. PressOK
tocontinue. Follow the instructionsfor congurating
thesettings.Pressthe OKbuttonafterwardstoscan
for services.
DiSEqC switch: If you have multiple satellite dishes,
selectthe antenna type DiSEqC switch.Youcan set
fourDiSEqCoptions(ifavailable).PresstheGREEN
key on the remote control to scan all satellites. To scan
only the highlighted satellite, press the YELLOW key.
Media Playback via USB Input
You can connect a USB hard disk drive or USB
memory stick to your TV by using the USB inputs
of the TV. This feature allows you to play files
stored in a USB drive. 2.5” and 3.5” inch (hdd with
external power supply) external hard disk drives
are supported.
IMPORTANT!Youshouldbackupyourlesbefore
making any connections to the TV set in order to
avoid any possible data loss. Manufacturer will not
beresponsibleforanyledamageordataloss.Itis
possiblethatcertaintypesofUSBdevices(e.g.MP3
Players)orUSBharddiskdrives/memorysticksmay
not be compatible with this TV. The TV supports
FAT32. NTFS ist not supported.
Quickly plugging and unplugging USB devices, is a
very hazardous operation. Do not repeatedly quickly
plug and unplug the drive. This may cause physical
damage to the USB player and USB device itself.
DonotpulloutUSBmodulewhileplayingale.
Media Browser Menu
Youcanplayphoto,music,andmovielesstored
on a USB disk by connecting it to your TV and using
the Media Browser screen. To do this, perform the
following:Connect a USB diskto one of theUSB
inputs located on the side of the TV.
You can connect two USB devices to your TV. If both
USBdevicesincludemusic,pictureorvideoles,USB
selection OSD will be displayed on the screen. The
rstUSBdeviceconnectedtotheTVwillbenamed
as USB Drive1. Select a device by using up/down arrow
keys and press OK.
PressmenubuttonandselectMediaBrowsertabby
using Left/Right and OK buttons. Main media browser
screen will be displayed. You can display the related
contentbyselectingtheVideo,MusicorPicturetab.
Follow the button indications under each on screen
menu for media playback features.
You can set your Media Browser preferences by using
the Settings dialog.
Change of format/Zoom
Changing Image Size: Picture Formats
Programmescan bewatched in differentpicture
formats, depending on the transmission received. You
can change the aspect ratio (image size) of the TV
forviewingthepictureindifferentzoommodes.Press
“
” button repeatedly to change the image size.
You can shift the screen up or down by using up/
down arrow keys while in 14:9 Zoom, Cinema
or Subtitle.