User Manual

22
EN
Adding a new TechniSat PowerLine Webcast 2 to an existing TechniSat
PowerLine Webcast 2 network
Removing a TechniSat PowerLine Webcast 2 from the network.
2
3
PowerLine
PowerLine PowerLine
Ethernet
Ethernet
Ethernet
Modem/Router PC Set-Top-Box
& TV
PowerLine
PowerLine PowerLine
Ethernet
Ethernet
Ethernet
Modem/Router PC Set-Top-Box
& TV
If your existing TechniSat PowerLine Webcast 2 network has already been secured using
the encryption button, proceed as follows to integrate additional adapters. After you have
successfully connected the new TechniSat PowerLine Webcast 2, you have to press rstly
the encryption button (and hold for 2 seconds) on an adapter in your existing network,
then the encryption button on the new TechniSat PowerLine
Webcast 2 (for 2 seconds again). And that’s it! The new TechniSat PowerLine Webcast 2 is
now integrated into your network.
To integrate additional TechniSat PowerLine Webcast 2 adapters into your network, repeat
the process described above.