Installation Instructions

Multytenne LNB

Art.-Nr. 0000/8810

Sealing the LNB connection

Dear customer,

in order to prevent any moisture from entering the Multytenne LNB, please use the self-

sealing duct tape supplied to insulate and seal the LNB connection.

1. First remove the foil from the sealing tape.

2. Apply one end of the sealing tape approx. 1-2 cm below the F-connector.

3. Now stretch the sealing tape as much as possible, and wrap it around the co-axial

cable and the F-connector, with overlapping edges. Stretching the sealing tape ensures

that the layers of tape form a sealed bond at the overlapping edges.