Installation Instructions

1 Mounting the external unit
When you unpack the external unit, you will find that it has already been partly pre-
assembled, so all you need to do is to mount the dish (item 2) and the connector piece
(item 3).
First, use the screws (A) to attach the dish to the AZ/EL bracket (item 1). Then loosen
the screw (B) on the swivel profile in order to mount the connector piece. Then mount
the LNB (item 5) on the LNB holder, using the LNB holding bracket (item 6) as shown in
illustration 1.
2 Installation
Selecting a location
a) First ensure there is an uninterrupted line of sight from the intended mounting
position in a southerly direction in order to receive signals from the satellite position
ASTRA 19,2° East. With the aid of the illustration below you can see whether you
have left enough space with regard to any neighbouring obstruction, in order to avoid
the signal being weakened by such an obstruction. When mounting the dish below a
terrace, please ensure that it is not in the shadow of a projecting roof.
b) Now attach the wall mount (item 4) horizontally at the location selected. In order to
ensure an optimum hold fort he external unit, you should select appropriate fastening
materials (dowels, screws, etc.). Because of the huge variety of wall conditions found
in practice, no fastening materials for mounting he wall mount is supplied with the
package.
c) Loosen the screw (C) on the wall mount, and attach the external unit using the
connector piece.
Angle A
(elevation)
Gradient
B
(cm per
m)
22° 40,40
24° 44,52
26° 48,77
28° 53,17
29° 55,40
30° 57,74
31° 60,00
32° 62,49
33° 64,90
34° 67,45
35° 70,02
36° 72,65
37° 75,36
38° 78,13
3