Operation Manual

EN
13
EN
> In order to select a language mark it by turning the selection knob and confirm by
pressing the selection knob.
6.4.4 Antenna Switch-over
In this menu you can select whether the internal ferrite antenna is used in the long and
medium wave range or whether an external antenna is used which is connected to
External Antenna.
> In order to change the antenna switching mark the line Internal (External) by turn-
ing the selection knob and confirm by pressing the selection knob.
> Change the setting by turning the selection knob and confirm the selection by
pressing the selection knob.
6.4.5 Firmware Update
In this menu you can start a Firmware-Update. In order to do this a SD/MMC card with
firmware must be inserted in the card-reader of the appliance.
> In order to start the Firmware-Update mark, by turning the selection knob, the line
INSTALLER START and then press the selection knob.
> Please note the following remarks in the display.