Operation Manual

DigitRadio 80 Technisat
13
General Operation
Setting Sleep
This feature enables your radio to switch to standby mode by itself after a set sleep time.
1. Press SLEEP button repeatedly to select through options Sleep off, 15, 30, 45, 60 or 90
minutes, press the ENTER button to confirm. The sleep icon
and sleep time will show on the
display.
2. To turn the sleep function off while the sleep timer is still counting down, press SLEEP button
repeatedly to select 'Sleep off'.
Setting Alarm
Your radio includes dual alarms. Set Alarm, making sure set time at first.
1. Press ALARM button repeatedly to select ‘Alarm 1 Setup’ or ‘Alarm 2 Setup’, and then press
ENTER button to confirm.
2. Turn NAVIGATE knob to select options, and then press ENTER button to confirm the setting.
Alarm states:
On or Off
Alarm time:
On Time: 00:00 (manually set up the time )
Alarm duration time:
15/30/45/60/90 minutes
Alarm source:
DAB, FM or Buzzer
Last listened:
Last listened station of saved preset stations (not available
for Buzzer mode)
Alarm active day:
Daily, Once, Weekends or Weekdays
Alarm volume:
turn NAVIGATE knob to set the alarm volume
Alarm volume:
Press button to set the alarm volume
3. When the display shows 'Alarm Saved', the alarm setting is successful. or will show on the
display.
4. To temporarily switch off alarm, press SNOOZE button to activate Snooze function when the
alarm sounds and set Snooze time cycle through 5, 10, 15 or 30 minutes.
" Note: the options of Snooze time depends on which alarm duration time you selected.
Alarm duration time
Snooze time
15 minutes
5 or 10 minutes
30 minutes
5, 10 or 15 minutes
45/60/90 minutes
5, 10, 15 or 30 minutes
5. To turn off alarm, press button when the alarm is sounding.
6. To cancel Alarm, refer to steps1-2 to set alarm ‘Off’.