Technisat DigitRadio 80 Important Safety Instructions 1. Read these instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use the speaker near water. 6. Clean only with dry cloth. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS SPEAKER TO RAIN OR MOISTURE. To reduce the risk of electrical shock, fire, etc.: 1.
DigitRadio 80 Technisat Contents Important Safety Instructions ................................................................................................... 2 Contents .................................................................................................................................. 3 Getting Started ......................................................................................................................... 4 Unit Front View ...............................................
Technisat DigitRadio 80 Getting Started Carefully remove your radio from the box. You may wish to store the packaging for future use. What you can find inside of your package ! Main unit ! Power adapter ! Wire antenna ! Converter ! Instruction manual Positioning your Radio Place your radio on a flat / stable surface that is not subject to vibrations. Avoid the following locations: ! Where the radio will be exposed to direct sunlight. ! Where the radio will be close to heat radiating sources.
DigitRadio 80 Technisat Unit Front View 1. MODE button 7. Press to switch among DAB, FM and Aux in modes. 2. 3. ENTER button Press to display or exit menu screen. NAVIGATE knob Turn to select through options. button Turn to adjust volume level. INFO button Press to browse program information. 6. 8. Press to confirm selection. VOLUME knob 5. Press to return to previous option. MENU button Press to switch radio on or standby. 4. BACK button SCAN button 9.
Technisat DigitRadio 80 Unit Back View 1. DAB/FM telescopic antenna 2. DC IN socket 3. Headphones socket 4. AUX IN socket 5. LINE OUT socket Connect to audio cable. This enables your radio stream music to external speaker. 6. USB 5V 1A port For charging your mobile device. Replacing antenna Your radio is assembled with telescopic antenna when producing. You can replace the telescopic antenna with provided wire antenna or converter. 1.
DigitRadio 80 2. Use the screwdriver to install Technisat Figure 2 the wire antenna by screwing antenna clockwise. (Refer to Figure 2.) 3. You can also connect DAB signal cable to your radio by using a converter. (Refer to Figure 3.
Technisat DigitRadio 80 DAB Mode When you turn on the radio it will automatically search and store all the available stations. You should conduct an additional Full Scan to ensure all stations are picked up and stored. It is also recommended every few months to run a new scan to pick up any new DAB/DAB+ that may have begun broadcasting after purchasing your DAB radio. 1. For initial use, radio will carry out a full scan and store stations list in memory. 2.
DigitRadio 80 Technisat Manual Tune This can help you when adjusting your antenna or when adding stations that were missed while auto tuning. 1. Press MENU button, turn NAVIGATE knob to select Manual tune, and then press ENTER button to confirm, the display will show the channel number and frequency. 2. Turn NAVIGATE knob to step among the channels and then press ENTER button select the current channel.
Technisat DigitRadio 80 FM Mode Selecting FM Mode 1. Press MODE button repeatedly to select FM mode. 2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise, the last listened FM station will be selected. 3. To manually change the FM frequency, while FM frequency shows up, turn NAVIGATE knob to change the frequency by 0.05MHz per step. 4.
DigitRadio 80 Technisat Recalling a Preset Station 1. Press PRESET button to show the saved preset stations. 2. Turn NAVIGATE knob to select the stored preset station you want to play, and then press the ENTER button to confirm. 3. The display will show ‘Preset Recall <#: (Empty)>’ if the preset station isn’t allocated.
Technisat DigitRadio 80 Aux in Mode AUX IN allows for quick and easy connection to an MP3 player or other external audio sources. 1. Before connecting to the mains socket, use a 3.5mm audio cable (not supplied) to connect to your external audio device through the AUX IN socket on the back of unit. button to switch unit on. 2. Connect power adapter to mains socket, press 3. Press MODE button repeatedly to select Auxiliary Input mode. 4.
DigitRadio 80 Technisat General Operation Setting Sleep This feature enables your radio to switch to standby mode by itself after a set sleep time. 1. Press SLEEP button repeatedly to select through options Sleep off, 15, 30, 45, 60 or 90 minutes, press the ENTER button to confirm. The sleep icon and sleep time will show on the display. 2. To turn the sleep function off while the sleep timer is still counting down, press SLEEP button repeatedly to select 'Sleep off'.
Technisat DigitRadio 80 Setting Equaliser This feature enables you to set a sound equalization profile. The equalization setting will change the tone of the sound from your radio. 1. Press MENU button, and then turn NAVIGATE knob to select Equaliser, and then press ENTER button to confirm. 2. Turn NAVIGATE knob to select Bass or Treble, and then press ENTER button to confirm. 3. Turn NAVIGATE knob to change the value of Bass or Treble among ‘-3’ to ‘+3’, and then press ENTER button to confirm.
DigitRadio 80 Technisat Factory Reset A factory reset resets all user settings to default values, so time/date and presets are lost. 1. Press MENU button, and then turn NAVIGATE knob to select Factory Reset, press ENTER button to confirm. 2. Turn NAVIGATE knob to select ‘YES’, and then press ENTER button to confirm. SW Version Press MENU button, and then turn NAVIGATE knob to select SW version, press ENTER button to confirm. The software version will show on the display.
Technisat DigitRadio 80 Specification ITEMS Specifications: Power Supply: Frequency Ranges: DESCRIPTION DAB/DAB+ and FM Digital Radio AC Input: 100-240V~, 50-60Hz DC Output: 9V, 2000mA FM: 87.5-108MHz DAB/DAB+: 174.928 – 239.