Operation Manual

b. Turn SELECT/TUNE knob to cycle through the alphanumeric character list, press

SELECT/TUNE knob to select an appointed character.

# Note: WEP/WPA pass codes are case-sensitive.

c. If a wrong operation is being conducted, select to delete designated

character.

# Note: = Backspace; means return to previous track; radio

will automatically save the WEP/WPA you’ve input, so no bother to re-enter these

codes.

d. After selecting the final character of your password, turn SELECT/TUNE knob to

, and then press SELECT/TUNE knob to confirm. The radio is connected to

wireless network.

# Note: If a password (WEP/WPA) isn’t required by your network, radio will connect to the network

automatically.

4. Setup wizard completed, press SELECT/TUNE knob again to exit.