Operation Manual

The time should now be displayed in stand-by mode, if it has been activated as per Point
6.2.5.
7.2 Receiving encrypted programmes
Your receiver is equipped with an integrated CONAX decoding system as well as with a
Common Interface. This allows you to receive encrypted programmes. To do this, you must
first insert either a CONAX Smartcard into the integrated card reader, or insert a CI module
including a valid Smartcard in the slot provided:
> Insert the CONAX Smartcard in the card slot of the integrated card reader.
or
> Insert a CI module into the slot.
> Insert the Smartcard in the card slot of the CI module. Ensure that the gold-coloured
chip of the Smartcard is located uppermost on the card in the direction of insertion.
> If an encrypted programme is now selected, your digital receiver will automatically
check the card reader as well as the interface, and will display the programme in
unencrypted form provided the appropriate valid Smartcard or an appropriate CI
module containing a valid Smartcard for this programme has been inserted.
8 Changing the basic programming
8.1 Configuring the Favourites list
This chapter describes how you can change the pre-programming of your digital receiver as
well as the Favourites programme list according to your preferences. This function is also
required to sort newly found programmes into the list after a search has been carried out.
In this regard you should know the following: your receiver is equipped with two programme
lists, the Favourites list and the Total list. The Favourites programme list includes all
the programmes you have placed there, using the procedure as described below. The Total
list contains all programmes.
This chapter also describes how you can delete programmes, or restrict access to program-
mes by means of the parental control feature. When calling up a programme list by pressing
OK the Favourites programme list will be displayed.
8.1.1 Calling up the Navigator (Programme List Manager)
To manage the Favourites list, proceed as follows:
> Press the Menu key to call up the Main Menu.
> Use the arrow keys up/down to mark the line Manage TV lists, to work on the
TV list, or Manage Radio list, to work on the radio list.
> Confirm by pressing OK.
The appropriate Navigator will be displayed, allowing you to work on the Favourites
list (TV or radio list).
The Favourites list will be displayed on the right half of the screen. This is currently
active, as the programme currently selected is highlighted in blue. The alphabetically
sorted Total list will be displayed on the left half of the screen.
This Total list includes all available programmes.
27