Operation Manual

> To display the programme contents for a specific day, press the numeric key corre-
sponding to the desired day of the week.
Displaying SFI overview for other programmes
> Press the green function key Programmes.
A list of SFI programmes will be displayed.
> Now use the arrow keys to mark the desired programme.
> Press the OK key to display the SFI overview of the marked programme.
7.14.7.5 SFI overview by programme type (category)
If you are particularly interested in certain types of programme, you can have the programme
information displayed according to certain categories such as movies, news, etc.
> Press the SFI key. The SFI table “Now” will be displayed.
> Press the blue function key SFI Menu to open a selection window.
> Use the arrow keys up/down to mark the line Categories.
> Confirm by pressing OK.
> Use the green function key Categories to open a window showing the programme
categories available.
> Use the arrow keys to select the desired programme category, and confirm by
pressing OK.
An overview of the day’s programmes conforming to this category will be displayed. >
Use the arrow keys up/down to move the marker to any specific programme.
> Use the arrow keys right/left to move the marker to programmes with a later
starting time.
The individual days of the week are shown along the lower border of the screen. If
information is available for any of the following days, the corresponding fields will be
highlighted.
> To display the programme contents of a specific day, press the appropriate numeric
key corresponding to the day of the week.
7.14.8 Exiting SFI
> Press the Menu or TV/Radio key to return to normal operation.
7.15 Timer recording
Your receiver is equipped with both a video recorder timer and a programme switching timer.
In terms of their programming, these two timer types differ only with regard to the respective
categories..
You can programme your timer manually as described in this chapter, or by means of the SFI
function, as described in Point 7.14.7.
1. Video recorder timer
Use a video recorder timer to switch your digital receiver on and off in your absence, in order
to record a programme by means of an external recording unit, e.g. a video recorder. Please
note that you must also programme your video recorder in order to record the programme.
If the unit was switched on by means of the video recorder timer, this will be indicated by
“rec” in the display. Most of the remote control functions will be disabled, to avoid an acci-
dental interruption of the recording. In stand-by mode, the active timer will be indicated by
the colon in the LED resp. time display blinking.
24