BedAnl DigiPal2 eng_050504.qxd 05.05.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 2 1 Contents 1 Contents . . . . . . . . . . . . . . . . . . . . . . .2 2 Illustrations . . . . . . . . . . . . . . . . . . . .5 Important notes on operation . . . . . . . . . . . . . .8 Note on disposal . . . . . . . . . . . . . . . . . . . . . . .9 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . .9 When not in use . . . . . . . . . . . . . . . . . . . . . . . .9 4 4.1 4.2 4.2.1 4.2.2 4.3 4.4 4.4.1 4.4.2 4.5 4.6 Connections . .
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 3 7.4.1 7.5 7.6 7.7 7.8 7.9 7.10 7.11 7.12 7.12.1 7.12.2 7.13 7.14 7.14.1 7.14.2 7.14.3 7.14.4 7.14.5 7.14.6 7.14.7 7.14.7.1 7.14.7.2 7.14.7.3 7.14.7.4 7.14.7.5 7.14.8 7.15 Dolby Digital (AC3 mode) . . . . . . . . . . . . . . .21 TV/Radio switching . . . . . . . . . . . . . . . . . . . .22 Return to last programme selected . . . . . . . .22 Display time and programme information . . .22 Additional Programme information . . . . . . . .
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 4 8.4.4 8.5 8.5.1 8.5.2 8.5.3 8.5.4 8.6 After the scan . . . . . . . . . . . . . . . . . . . . . . . . .43 Service settings . . . . . . . . . . . . . . . . . . . . . . .44 Activating default (factory) setting . . . . . . . . .44 Delete all programmes . . . . . . . . . . . . . . . . . .44 Updating Software . . . . . . . . . . . . . . . . . . . . .45 Copying settings . . . . . . . . . . . . . . . . . . . . . .45 System configuration . . . . . . . . .
BedAnl DigiPal2 eng_050504.qxd 05.05.
BedAnl DigiPal2 eng_050504.qxd 05.05.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 7 Dear customer, congratulations on your decision to buy the DigiPal 2 digital receiver. This operating manual is designed to assist you in using the comprehensive functions of your new digital receiver to the optimum. We have tried to keep the instructions as brief as possible, while making them as comprehensive, and comprehensible, as necessary. The range of features of your unit is constantly being expanded in the form of software updates.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 8 3 Please read this first > > > > > > > > > Before you set up your unit for operation, please first check that the package contains all the components that should be there. The following are supplied as standard: 1 digital receiver, 1 mains power cable, 1 remote control unit, 1 operating manual, 1 guarantee card, 2 batteries (1,5V AAA size). Insert the batteries provided in the battery compartment of the remote control unit.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 9 Help function: Where available in the menu, pressing the blue function key will cause a help text to be displayed, pressing again will return to normal operation. Note on disposal The packaging of your unit consists entirely of recyclable material. Please sort the components apprpriately, and dispose of them via the “Dual System”, or your equivalent recycling system.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 10 Connecting the DVB-T receiver a. Connect the antenna with the terrestrial antenna input of the DVB-T receiver. b. Scart connection between the DVB receiver and the television set. c. Connection between the antenna output of the DVB-T receiver and the antenna input of the television set. d. Scart connection of a video recorder with the VCR Scart socket of the DVB receiver. e. Connection between the audio outputs and a Hi-Fi installation. f.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 11 4 Connections The references below to items a b c etc. refer to the illustration on page 10. 4.1 Antenna a The cable coming from the terrestrial antenna (roofmounted or room antenna) should be connected with the terrestrial antenna input of the receiver. Wherever possible please use a roof-mounted antenna. An internal room antenna may be sufficient under very favourable reception conditions.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 12 4.4 Hi-fi amplifier 4.4.1 Analogue e To enjoy the best possible sound quality, you can connect the digital receiver to a hi-fi amplifier. Use a suitable cable to connect the cinch sockets Audio R and Audio L of the digital receiver to an input of the hi-fi amplifier (e.g. CD or AUX; please note that the Phono input is not suitable!). 4.4.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 13 Pressing the green function key takes you back to the previous step of the installation procedure. This allows you to correct any entries made in error. If the initial installation is not carried out at all, or is interrupted, your unit will start operation with its standard pre-programmed settings. The initial installation procedure described her serves only as an example.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 14 > (Fig. 5-6) Press the OK key now to confirm, and an automatic programme scan will be carried out. The entire reception range of the receiver will be scanned for digital programmes This procedure may take several minutes. Please note any messages displayed on the screen (Fig. 5-6). Updating the software When the programme scan has been completed, the digital receiver will check whether a new version of the software is available for your unit.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 15 6 Settings Now that you have completed connecting your new digital receiver, and have commenced operation, you can, if you wish, further optimize the settings of the digital receiver for your personal preferences. 6.1 Menu language Under this menu item you have the option of setting the menu language according to your personal preference. To alter the OSD language proceed as follows: > Press the Menu key to call up the Main Menu. (Fig.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 16 6.2.2 Country This function provides for automatic adjustment for summer and winter time. Using the arrow keys right/left, enter your home country in the line Country. > Press the Back key to return to the menu Settings, or press the Menu key to return to normal operation. The settings are automatically stored in memory. 6.2.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 17 6.3 Audio/Video settings In order to optimize the performance of your digital receiver in conjunction with your television set, you may wish to make further settings in the menu Audio /Video Settings. > Press the Menu key to call up the Main Menu. > Use the arrow keys up/down to select the line Settings. > Confirm by pressing OK. The sub-menu Settings will be displayed. (Fig.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 18 6.3.6 Dolby Digital (AC3) A number of movies are transmitted in the Dolby Digital format. This is indicated after a programme has been selected by the Dolby logo in the information window. If you have connected a Dolby Digital 5.1 channel amplifier to the system, you can enjoy movies in 5.1 channel Dolby Digital sound where available. To enjoy this feature, you must simply connect the Audio Out Digital output (see Point 4.5.
BedAnl DigiPal2 eng_050504.qxd > > 05.05.2004 16:45 Seite 19 Press the same key again, either on the receiver front panel or on the remote control, to switch the receiver off again. The receiver is now in standby mode,and the display on the receiver will show the time. If the current time is not shown, this must still be downloaded to the unit.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 20 7.2.3.1 Selecting a list (Fig. 7-2) (Fig. 7-3) To facilitate finding programmes your receiver is equipped with several programme lists. You may select your Favourites list (see Point 8.1), or display the alphabetically sorted Total list or sort the list by Providers. > Press OK to display the active programme list.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 21 7.3 Volume control You have the facility to adjust the volume of your digital receiver. This makes operating the receiver even more convenient, since you can access all important functions from a single remote control, and will rarely have to use the remote control of your television set. When the digital receiver is switched on it will reproduce sound at the volume level last set.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 22 You can now enjoy the programme in full 5.1 channel Dolby Digital sound. If you would like your receiver to recognise and reproduce Dolby Digital broadcasts automatically, you should set your receiver to automatic AC3 reproduction as described in Point 6.3.6. 7.5 TV/Radio switching The pre-programming setup contains not only television programmes, but radio programmes as well. > Press the TV/Radio key to switch the digital receiver to radio mode.
BedAnl DigiPal2 eng_050504.qxd > 05.05.2004 16:45 Seite 23 Press the Info key once more to exit the information window. 7.9 Channel information > > > > > Press the OK key Use the arrow keys up/down to mark the programme you wish to view informations. Press Option key to display the data of the channel currently selected. (Fig.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 > > (Fig. 7-11) > VT Group VT Block > > 16:45 Seite 24 Press the Video text key to switch on the video text (Fig. 7-11). Use the numeric keys to enter the video text page you wish to view. Your entry will be displayerd in the upper left corner of the screen. When you have entered the desired video text page, your receiver will search for this page.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 25 Please note that these functions are only available when sub-titles are actually being broadcast, and the settings are not stored in memory if you switch to another channel. 7.14 Electronic Programme Guide SFI Your digital receiver provides an electronic programme guide. This allows you to view the programme information relating to one or more programmes on your screen.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 26 7.14.3 Viewing the Electronic Programme Guide > > (Fig. 7-12) Switch on both the digital receiver and your television set. Press the SFI key on the remote control of your digital receiver. The electronic programme guide will now be displayed on screen (Fig. 7-12). The programmes you have selected, or which were listed as part of the default setting, are shown here with their current programmes being broadcast.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 27 7.14.6 More > > > > > or > While the SFI table “Next” is displayed, press the yellow function key to display the SFI table “More”. (Fig. 7-14) An additional time window will be displayed in the title line of this table. This window will show the time of the SFI table displaed. Press the yellow function key to page onward by the time indicated in the yellow bar. Keep the yellow function key depressed to continue paging on.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 28 7.14.7.3 SFI Timer programming Use the electronic programme guide SFI to simplify the programming of timer events. Marking a programme > Use the arrow keys or function keys to mark the appropriate programme > Press OK to automatically mark the programme, the receiver will switch to this channel when the programme begins. or Recording a programme (timer operation) > Use the arrow keys to mark the desired programme.
BedAnl DigiPal2 eng_050504.qxd > > > > > 05.05.2004 16:45 Seite 29 Press the blue function key SFI Menu to open a selection window. Use the arrow keys up/down to mark the line Programmes. Confirm by pressing OK. The overview for today of the programme selected will be displayed. (Fig. 7-15) Use the arrow keys to move the marker to the appropriate programme or starting time. The individual days of the week are displayed along the lower border of your screen.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 > 16:45 Seite 30 The individual days of the week are shown along the lower border of the screen. If information is available for any of the following days, the corresponding fields will be highlighted. To display the programme contents of a specific day, press the appropriate numeric key corresponding to the day of the week. 7.14.8 Exiting SFI > Press the Menu or TV/Radio key to return to normal operation. 7.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 31 > Press OK to go to the entry window used to programme a new timer event. (Fig. 7-20) To programme a timer event, proceed as follows: Source > Use the arrow keys to mark the column Source. > Press OK to enter the desired source (TV or Radio). > Use the arrow keys up/down to mark the desired source (TV or Radio). > Press OK. > Use the arrow keys to mark the column Channel. > Press OK.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:45 Seite 32 Transferring data into memory > When you have completed the programming, press the yellow function key Accept to transfer the data into memory. If under Programme you have selected a programme that is blocked as per Point 8.3, you must first enter the PIN code before the data will be accepted into memory. > Press the TV/Radio key to return to normal operation.
BedAnl DigiPal2 eng_050504.qxd > > > > > 05.05.2004 16:45 Seite 33 Use the arrow keys up/down to mark the additional field Type. Confirm by pressing OK. A window will be displayed, showing the various available types of timer. Use the arrow keys up/down to select the desired timer type. To accept the timer type, confirm by pressing OK. When you have completed the programming, press the yellow function key Accept to transfer the data into the timer memory.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:46 Seite 34 > (Fig. 8-2) (Fig. 8-3) Confirm by pressing OK. The appropriate Navigator will be displayed, allowing you to work on the Favourites list (TV or radio list). (Fig. 8-2) The Favourites list will be displayed on the right half of the screen. This is currently active, as the programme currently selected is highlighted in blue. The alphabetically sorted Total list will be displayed on the left half of the screen.
BedAnl DigiPal2 eng_050504.qxd > > 05.05.2004 16:46 Seite 35 Use the arrow keys up/down to mark a programme that you wish to include in the list. Press the yellow function key Add to add the marked programme to the Favourites list. Marking blocks of programmes To mark several programmes simultaneously proceed as follows: > Press OK to access the Selection mode. The marked programme will be indicated by a cross at the left side of the entry.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:46 Seite 36 8.1.3.2 Deleting from the Total list To remove programmes from the Total list, proceed as described in Point 8.1.3.1. However, after calling up the Navigator, press the red function key Programmes, and move to the Total list first before selecting the function Delete. 8.1.4 Sorting programmes (Fig. 8-6) Call up the Navigator as described in Point 8.1.1 to sort the programme order of the Favourites list according to your personal preference.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:46 Seite 37 Please note: The more programmes are added to the electronic programme guide, the longer it will take to update the SFI data! Also, the more programmes are added, the less likely it is that the full preview period of seven days for the electronic programme guide can be accommodated in the limited memory space available. > Press the Menu key to display the Main Menu. > Use the arrow keys up/down to mark the line Settings. > Confirm by pressing OK.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:46 Seite 38 You can now initiate the updating procedure manually: > Use the On/Standby key to switch off the receiver (Standby). > Now, while the display shows “oooo”, press the key SFI. The receiver will now perform an update. This will be indicated by the message SFld appearing briefly in the display, followed by a progressive indication of the percentage of SFI data already downloaded.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:46 Seite 39 Your receiver will now check whether SFI data is being received on the channel selected. This infromation will be displayed along the bottom of the window. Update time > In the line Update time use the numeric keys to set the time at which you wish the automatic download of SFI data to be performed. Updating > To download the data of the data channel, mark the line SFI Updating. > Switch the function on by pressing OK .
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 > > > > > > (Fig. 8-11) > > > 16:46 Seite 40 Use the Menu key to call up the Main Menu. Use the arrow keys up/down to mark the line Settings. Confirm by pressing OK. The sub-menu Settings will be displayed. Use the arrow keys up/down to mark the line Change Receiver PIN. Confirm by pressing OK. Now use the numeric keys to enter the current receiver PIN code (Default setting 0000). (Fig. 8-11) Use the numeric keys to enter the desired new receiver PIN code.
BedAnl DigiPal2 eng_050504.qxd > > 05.05.2004 16:46 Seite 41 When you have completed configuring the programme list according to your preference, press Menu to return to normal operation. To lift the blocking of individual programmes, proceed as described above. Mark the specific programme, and press the yellow function key to remove the Parental Control symbol. 8.4 Programme search (scan) To receive new programmes, several options exist to carry out a programme search. 1.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:46 Seite 42 8.4.2 Expanded Scan When using the expanded scan function (Fig. 8-15) you have two options for performing a programme scan. 1. Frequency scan When using the frequency scan mode, a specific frequency range selected by the user will be scanned for programmes. (Fig. 8-15) 2. Channel scan When using the channel scan mode, a specific range of channels selected by the user will be scanned for programmes.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:46 Seite 43 8.4.3 Manual Scan Should a programme not be found by either the automatic scan or the expanded scan, you can scan a specific channel for available programmes, or you may use PID data to search for a specific programme.These numbers may have to be found in the Internet, or obtained from the relevant programme provider. > To scan a particular channel (Fig. 8-16), use the arrow keys left/right to enter the desired channel.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 > > > 16:46 Seite 44 Confirm by pressing OK. Please note any other messages displayed on screen. Press the Menu key to return to normal operation. Independently of whether you have added the found programmes automatically to the Favourites list, you can still add these to the Favourites manually at any time, as described in Point 8.1. 8.5 Service settings (Fig. 8-18) (Fig. 8-19) You can revert to the factory-installed default settings at any time.
BedAnl DigiPal2 eng_050504.qxd > > 05.05.2004 16:46 Seite 45 Use the arrow keys left/right to select Yes or Abort. Confirm your selection by pressing OK. 8.5.3 Updating Software You also have the facility of updating the operating software of your digital receiver. > Press OK to display the sub-menu Software update (Fig. 8-21). To perform a software update, mark the line Software update. > Set the software update function to on by pressing OK.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 > 16:46 Seite 46 To copy the settings, press one of the keys on the panel of the source receiver. The settings of this source receiver will now be transferred to the other, receiving, receiver. Please note any messages displayed on screen. 8.6 System configuration Use this menu item to view the specific data relating to your receiver. > Use the arrow keys up/down to mark this line in the sub-menu Settings. > Confirm by pressing OK.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:46 Seite 47 DVB-T receiver: The signals received by the antenna cannot be processed by the television set. The DVB-T receiver processes them in such a way that audio and video signals (AV) are available at its outputs, which can then be passed on to the television set. OSD: On Screen Display - data shown on screen PID: Packet Identifier, Packet-ID Receiver: The signals received from the antenna cannot be processed by the television set.
BedAnl DigiPal2 eng_050504.qxd 05.05.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:46 Seite 49 Audio output analogue: Audio channel left/right cinch sockets (white, red) Video text: Teletext filtering in accordance with ETS 300 472 Standard Scanning teletext data (FBAS) corresponding to ITU-R BT.653-2 lines: 6-22 and 320-335 Soft video text 800 pages memory Display: LED display 4-digit (7 segment) Serial interface RS 232: Type RS 232, bidirectional Bit rate 115,2 kBit/s max.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:46 Seite 50 11 Trouble-shooting guide Problem Possible cause Solution Various programmes not shown in the programme list Wrong programme list selected Select another programme list (see Point 7.2.3.1) Sound OK, no TV picture Radio mode selected Switch to TV mode Clock time not shown in stand-by mode Clock time not downloaded Go to ZDF or other major channel for 30 secs. Switch on stand-by clock (Point 6.2.
BedAnl DigiPal2 eng_050504.qxd 05.05.
BedAnl DigiPal2 eng_050504.qxd 05.05.
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:46 Seite 53 Index AC3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 21 Antenna adjustment . . . . . . . . . . . . . . . . . . . . . . . . . .18 Antenna feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Automatic search . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Channel information . . . . . . . . . . . . . . . . . . . . . . . . . .23 Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BedAnl DigiPal2 eng_050504.qxd 05.05.2004 16:46 Seite 54 For daily use Switching on and off > > > Switch on the digital receiver bypressing the On/Standby key, either on the receiver or on the remote control. Press this key again to switch the receiver off. The receiver is now in standby mode, the display on the receiver shows the time.
