Installation Instructions

Mounting advice
Art. No. 0000/8810
Multytenne LNB
Dear customer,
Your Multytenne LNB ist designed for use with the SATMAN 45 satellite dish antenna.
With this, you can receive the digital programmes of 4 orbital positions while located in
Germany. Reception in neighbouring or other countries may be restricted.
The Multytenne LNB is pre-set for the following 4 satellite positions:
Astra 19,2° East
Eutelsat 13° East
Astra 23,5° East
Eurobird-Astra 28,5° East
In order to receive the programmes of all 4 satellite positions via your digital receiver,
you must programme these satellite positions in the antenna settings of your receiver,
as per the operating manual of your receiver.
Position/Option Switching criterion Satellite
A/A 1 Astra 19,2° East
B/A 2 Eutelsat 13,0° East
A/B 3 Astra 23,5 ° East
B/B 4 Eurobird-Astra 28,5° East
Set the 4 switching criteria of the DiSEqC control as follows:
1. Push the LNB housing onto the twin-tube frame, and hold it in position by means of
the self-tapping internal hexagolnal screw supplied.
Internal hexagonal screw
2. Now use a suitable antenna calibration tool (DiSEqC setting: A/A) to position the dish
fort he Astra 19,2° East satellite.
3. Use a suitable co-axial cable to connect the LNB to the digital receiver.
Note!
Do not open the LNB housing, as this would compromise the weatherproof qualities, and
the LNB could be damaged by seeping water and humidity. Opening the LNB housing
will void the guarantee!
6