User`s guide

TechniSat DVB-PC TV Stars - Users Guide Part DVBViewer TE
Chapter 2: Watch TV with DVBViewer TE
Version 4.4.1
4
Configure COM Port IR Receiver / WinLIRC
If you want to use the TechniSat COM-Port IR receiver, you have to select the option
WinLIRC
Figure 2.2: Remote Control selection: Use WinLIRC
Then press the OK Button and you have to configure the WinLIRC application
1. The following error message might appear:
Figure 2.3 WinLIRC
If this message appears, the default configuration of WinLIRC does not match
the needs of your system.
2. Press OK to show the configuration tab.
3. Here you have to configure the COM port (e.g. COM1), where your IR
receiver is attached.
Figure 2.4 WinLIRC Configuration