Operation Manual

English

Information for “normal use”

The AudioMaster BT 90 is designed for indoor use and must not be

used outdoors or in wet conditions. The devices must not be modi-

ﬁed or altered in any way. Connect the AudioMaster BT 90 up as

described in the instructions and pay attention to the warning noti-

ces. Only operate the device with the mains voltage and frequency

speciﬁed on the rating plate.

Information about environmentally friendly operation

(Use the stand-by function to minimise electricity usage and

operating costs)

To reduce the electricity usage of the device when not in use

press the “On/Standby” button. This saves electricity.

For a complete Declaration of Conformity please refer to:

http://www.technisat.de/audiomasterbt

Further Information

All electrical and electronic equipment sold in the European

Union must carry a CE mark to show that the device in

question complies with the legal requirements (e.g. electro-

magnetic compatibility or safety requirements).

In line with the regulations governing the disposal of old

electrical and electronic equipment, all devices that carry

this symbol should not be disposed of in general household

waste. Please contact your local recycling centre or the local

authorities to ﬁnd out about free disposal where applicable.

This serves to protect the environment and public health as

well as saving (scarce) resources through recycling.