Operation Manual

43
English
Please note the following when WAK mode is enabled:
When WAK mode is enabled, the AudioMaster BT 90 is in an extended standby mode so that it can
respond to signals at the TV or DVD input. If the AudioMaster BT 90 is switched into standby using the
supplied remote control, it no longer responds to a signal at the inputs. To be able to switch on and
off automatically, the AudioMaster BT 90 has to be switched on again first using the supplied remote
control.
Please also note that the "Sound" button on the TV's original TechniSat remote control does not work
with the AudioMaster BT 90 when WAK mode is enabled. Please see the applicable section of the
instruction manual for your TechniSat TV for further details.
Since the AudioMaster BT 90 is in an enhanced Standby mode while activating the WAK mode, the
power requirement is typically greater than the power requirement in the normal Standby mode.