Operation Manual

42
Enabling/disabling WAK mode:
1
Press and hold the MUTE button from the switched on AudioMaster BT 90 until
is shown on the display.
2
Press the +/– volume buttons to switch the function on or off. or is
shown on the display.
3
Press and hold the MUTE button again to exit the menu.
English
Automatic on and off (WAK mode)
The AudioMaster BT 90 has a mode (WAK mode) in which the device responds to signals at the TV and
DVD input.
The AudioMaster BT 90 automatically switches off as soon as there is no longer a signal at the TV or DVD
input, e.g. when the connected TV has been switched off. The AudioMaster BT 90 switches off with a delay
of approx. 30 seconds.
If a signal is detected at the last selected TV input, e.g. because a connected TV device is switched on,
the AudioMaster BT 90 automatically switches on.
However, the AudioMaster BT 90 does not switch on automatically by turning on the TV-set, when the
DVD input has been selected before the automatic turning off and vice versa.
WAK
OFFON