Operation Manual

The display shows

IRL

Press the chosen function on the AudioMaster BT 90 remote control, e.g. “Volume +”.

Now the display shows the chosen function, e.g.

Within 20 seconds press the key you wish to allocate to this function on the

TV remote control.

Once this has been successfully allocated the display will show

and you

can continue with the programming of the next key function, e.g. “Volume –“.

If the display shows

FAI

or the relevant function cannot be activated through

the TV remote control this means the allocation has failed and you need to repeat

steps 4 to 8.

Exit menu

Press and hold the “On/Standby” key again for longer than 5 seconds to exit the

“IR learning function” menu.

If the Soundbar does not receive any input instructions from the remote control within

a period of 60 seconds the menu navigation returns to normal mode automatically.

Note: The red “On/Standby” key on the AudioMaster BT 90 remote control has a dual

function. Press it once and the display will show

, which allows the switching

on function to be programmed. If the red “On/Standby” key on the AudioMaster BT 90

remote control is pressed twice in quick succession the display will show

STB

and

the Standby or switching off function can be programmed. If your TV remote

control has only one key for the “On” and “Off” functions both the “On” and

“Standby” functions must still be allocated with this command.

STEREO

SURROUND

BASS

TREBLE

BLUETOOTH

PAIRING

STANDBY

MUTE