Operation Manual

40
1
Hold the TV remote control in position.
2
Switch the Soundbar on.
3
Press and hold the “On/Standby” key of the Soundbar remote control for approx. 3 seconds.
English
IR learning function
The AudioMaster BT 90 can learn the infrared code of your TV remote control and therefore allows you to control the functions of the
Soundbar and TV device via one remote control. You can allocate the instructions for the Soundbar to any key of the TV remote control.
When choosing a key make sure that the instructions for the Soundbar do not conflict with the TV device. We recommend that you deacti-
vate the internal loudspeaker of the TV device once the Soundbar is connected.
Pairing your subwoofer (initial installation)
In order to control a wireless subwoofer through the Soundbar it needs to
be registered with the Soundbar. The registration process happens as follows:
1
Unplug the subwoofer from the mains.
2
Switch the Soundbar on and press the “Bluetooth
®
Pairing” key
for a minimum of 3 seconds. The display will now show
WLP
.
3
Plug the subwoofer into the mains.
4
After a short time the registration process should be complete, which will
appear in the display as
CON
. The power indicator of the subwoofer
(LED) will change from red (standby) to green (active).
If the registration has failed, after a minute the
display will show
FAI
. In this case repeat
the process.
Warning: Only one wireless subwoofer can be
connected to the Soundbar at any time.