Operation Manual

39
English
Lip
EQ
EQ1 EQ2 EQ3
sub
on off
DRC
on off
Press the “Sound” key again briefly one more time and the display
eq
will appear.
Now use the Volume +/– keys to choose between three pre-set equalizer settings to
adjust the playback to suit the location.
EQ1
for a wall-mounting of the AudioMaster BT 90 below the flat-screen TV
(factory setting).
EQ2
for a set-up where the AudioMaster BT 90 is positioned in front of a flat-
screen TV.
EQ3
for a set-up where the AudioMaster BT 90 is in a rack or a shelf.
When the “Sound” key is pressed again the display changes to
DRC
.
“Dynamic Range Compression” is a setting option created by Dolby Laboratories.
When activated, the dynamic range of Dolby encoded data streams can be auto-
matically reduced, which also reduces differences in volume. This makes it possible
to enhance quiet tones and suppress loud ones.
The Volume +/– keys can be used to switch the
DRC
function on or off.
Exit menu
Press and hold the “Sound” key again for longer than 3 seconds to exit the “Extended
functions” menu.
If the Soundbar does not receive any input instruction from the remote control within a
period of 30 seconds the menu navigation returns automatically to normal mode.