Instructions

95
DE
EN
Channel search/ISIPRO
You have various options for searching for new channels or updating the channel
list. You can use the ISIPRO channel list function to download a new channel list
for your receiver from the satellite or run a channel scan
> To download the current channel list, use the up/down arrow keys to
highlight the ISIPRO channel list update line and start the process by
pressing the OK key.
The current channel list will now be downloaded via satellite. Please observe
subsequent screen displays and notes under Section 18.3 in your instruction
manual.
> If you wish to perform a channel scan instead of a channel list update via
satellite, use the up/down arrow keys to highlight the All channels or All
unencrypted channels field and then start the channel scan by pressing the
OK key.
During this scan, all selected satellites in the antenna configuration are
automatically scanned for channels. This procedure may take several
minutes. Please note all messages displayed on the screen.
If you skip the channel scan/channel list update, the default channel list will
be loaded.
Digit S3 DVR_V2.indd 95Digit S3 DVR_V2.indd 95 23/02/2022 08:5323/02/2022 08:53