Instructions

84
5.4 Changing a seing
You can create seings using the Arrow selection, the Selection list, by entering
numbers and by using the virtual keyboard. The device specifies the method that
can be used to change a highlighted seing. This is evident from the following
displayed symbols:
- Arrow selection (Section 5.4.1)
Arrows are shown on the le- or right-hand edge of the highlight.
- Selection list (Section 5.4.2)
The symbol is shown at the right-hand edge of the highlight.
- Numerical input (Section 5.4.3)
- Virtual keyboard (Section 5.4.4)
The symbol is shown at the right-hand edge of the highlight.
5.4.1 Arrow selection
> If shown to the le and right next to the set value, you can alter this
using the le/right arrow keys.
5.4.2 Selection list
If is shown on the right next to the set value, the value is altered via the
selection list.
> Press the OK key to open the selection list.
Digit S3 DVR_V2.indd 84Digit S3 DVR_V2.indd 84 23/02/2022 08:5323/02/2022 08:53