Instructions

126
Error Possible cause Remedy
Cannot receive
channels that were
previously received
Dish misaligned or
defective
Check dish
Channel transferred
to a dierent
transponder
Perform a search/scan
Channel no longer
being broadcast
none
Intermient appearance
of square blocks in
the picture. Switches
to freeze frame
intermiently, no sound.
Screen sometimes
blank with the message
“no signal”.
Heavy rain or snow Remove snow from
dish antenna
Dish incorrectly
aligned
Re-align dish
Dish is too small for
reception location
Use larger dish
Obstacle between dish
and satellite, e.g. a
tree
Mount the dish to give
direct line of sight
No picture, no sound
display on
Short circuit in LNB
line
Switch o receiver,
rectify short circuit,
switch receiver back
on
Faulty or missing cable
connection
Check all cable
connections
Faulty LNB Replace LNB
Incorrect external unit
installed at receiver
Modify seing
Antenna cannot be
rotated
Motor not compatible
with DiSEqC 1.2
Use a suitable motor
Text in e.g. Info box
or EPGplus detailed
information is hard
to read at a distance
Character size is set
to"small"
Adjust character size
Digit S3 DVR_V2.indd 126Digit S3 DVR_V2.indd 126 23/02/2022 08:5323/02/2022 08:53