Instructions
122
13.3 Switching between TV/Radio
> Using the 0 key, retrieve the NAV menu.
> Now you can use the up/down arrow keys to highlight the desired operating
mode (TV or Radio) or Back to exit the menu again.
> Pressing the OK key confirms the selection and switches to the selected
operating mode.
The unit switches to the last channel selected.
13.4 Volume control (ISI mode)
You have the option of adjusting the volume on your digital receiver. This facilitates
operation of the receiver, since it means you can access all the major functions
on a single remote control, and will only rarely have to resort to using the remote
control for the TV.
> To adjust the volume of your TV, press the Volume + toggle switch to
increase the volume and the Volume - toggle switch to decrease it.
During volume adjustment, the currently set volume is displayed at the upper
edge of the screen.
When you switch on the digital receiver, sound will be reproduced at the
volume level last set.
Volume control and the mute buon also control the digital audio outputs
(not for the bit stream seing) and switch these to mute.
Digit S3 DVR_V2.indd 122Digit S3 DVR_V2.indd 122 23/02/2022 08:5323/02/2022 08:53