Instructions

119
DE
EN
12 Soware update via USB interface
You have the option of updating the receiver's soware via the USB interface.
To be able to run the soware update via the USB interface, you first need
to download the current soware version from the TechniSat homepage
(www.technisat.de).
The update can be performed using a standard USB flash stick which has
been formaed to the FAT32.
> Now copy the soware file onto the USB flash stick.
> If you only want to run a single update, copy thesingleupdatefile or, for
multiple updates, the autoupdate file to the USB stick.
Please bear in mind that the singleupdate or autoupdate files must not
have a file extension. Please also note that, to do this, the folder seings on
your PC must be set to hide file extensions.
Do not store multiple soware files on the USB stick. Furthermore, the
"autoupdate" and "singleupdate" files must not be present at the same
time.
> Now switch the receiver to standby and insert the USB stick into the
receiver's USB port. Now switch the receiver on.
The update procedure will now be displayed, with the following steps.
- The message "Loading soware from storage device" will now appear
- Then a progress bar appears showing the progress of the soware
download process.
> When the update is complete, the TV picture appears again. You can now
switch the receiver to standby and remove the USB stick.
The update should not be interrupted at any point by removing the USB
stick or by switching o the power supply, as this can cause the device to
malfunction.
Digit S3 DVR_V2.indd 119Digit S3 DVR_V2.indd 119 23/02/2022 08:5323/02/2022 08:53