Instructions

118
11.2.4 Seing tags
> Skip to a location in the recording as described above where you want to
add a tag.
> Pressing the Record key sets a tag at the selected location.
Tags can also be set during playback (Section 12.1.4 in your instruction
manual) and in the DVR recordings processing menu (Section 13.1 in your
instruction manual) manually or automatically, provided that automatic
programme marking is switched on (Section 13.5.3 in your instruction
manual).
11.2.5 Jump to tags
During playback you have the option of navigating directly to locations in the
recording where you have set tags.
> Use Options selection to select the tag under the Tag item to jump to the
desired point in the recording.
11.2.6 Stopping playback
> Press the Stop buon to stop playback.
Playback is ended and the receiver reverts to normal mode. In doing so the
receiver "takes note" of the place in the recording where playback ended.
If you start playing this recording again, it will automatically resume at the
point where you previously le o.
Digit S3 DVR_V2.indd 118Digit S3 DVR_V2.indd 118 23/02/2022 08:5323/02/2022 08:53