Manual

32
9.4 Automatic station selection
> Press the SCAN buon to start the automatic station scan. The station frequency runs upwards on the display.
or
> Keep p or q pressed for approx. 2 seconds to automatically search for the next station with a strong enough signal.
If a FM station with sucient signal intensity is found, the scan stops and the station is played. If an RDS station is being
received, the station name appears and, possibly, radio text.
Please use manual station selection for seing weaker stations.
In Menu > Scan seing, you can set whether the scan only finds strong stations (Strong stations only > YES) or all stations
(Strong stations only > NO). To do so press the MENU buon and > Scan seings. Confirm the selection with OK.
9.5 Seing mono/stereo
> Press the MENU buon and use p or q to select > Audio seing.
> Select YES or NO, for playback in mono sound only in the event of weak FM reception.
> Confirm by pressing OK.
9.6 Saving USW stations
The favourites memory can store up to 30 stations in the USW range.
The saved stations remain stored even in the event of a power cut.
> Seing the desired stations.
> Keep the PRESET buon pressed until the favourites memory list appears.