Manual

29
EN
FR
IT
NL
PL
CZ
SK
8.6 Deleting a saved memory slot
> Simply save the new station in the respective channel slot as described in Section 8.4.
8.7 Signal intensity
> Press the INFO buon as oen as required until the signal intensity is shown:
Minimum signal intensity
Signal
intensity
> The bar modulation shows the current level.
Stations with a signal intensity below the required minimum signal intensity are not transmiing a strong enough signal.
Adjust the antenna position again if required.
> Under the menu item Manual seing, you can select the reception channels individually and see their signal intensity.
You can adjust the telescopic antenna optimally for channels suering from poor reception in the installation location.
This is how stations which have not been found during a scan up until now can be found and played. To do so, select
MENU > Manual seing and then a station frequency. The signal intensity is thereupon shown in this frequency.
By pressing the INFO buon several times, dierent information is scrolled through, such as station type, multiplex name,
frequency, signal error rate, data bit rate, station format, date, DLS.