User Manual

72
> Change the value with the  or  buons and then press OK.
This preset can be retrieved at any time in My EQ.
18.2 Internet seings
> Press the MENU buon and then select [Main Menu > System Seings >
Internet Seings].
In this menu you will find some seings and information about the Internet
connection.
> Select Network wizard to establish a WLAN connection.
The network wizard shows you all the WLAN stations within range. Use
the / and OK buons to select the WLAN network you recognise and
enter the password using the displayed keyboard. Then select
and
press the OK buon. If the password entered is correct, a connection to
the network is now established. The signal bars
in the status bar of the
display indicate whether a connection exists.
To cancel the input, select and press the OK buon. If you make a
mistake, you can delete the last leer you entered by pressing
.
> If you want to establish a WPS connection instead of entering the password,
proceed as follows aer selecting the WLAN network:
How you activate WPS on your router can be taken from its instruction
manual.
> Select [Press buon] on the DIGITRADIO 586 aer selecting the WLAN
network. Take note of the instructions on the display.
> Start WPS on your router by pressing the relevant buon.
> If your router only supports the WPS PIN, select [PIN] on the DIGITRADIO
586 and take note of the PIN shown on the display. You then need to enter
the PIN in the router.
18.2.1 WPS connection
> Select [Internet seings > PBC WLAN set up] if your router has the WPS
function. This establishes a direct connection to the router without having to
enter the - WLAN password.
How you activate WPS on your router can be taken from its instruction
manual.
> Start WPS on your router by pressing the relevant buon. Note the
Instructions on the DIGITRADIO 586 display.