MP3 Docking Station User Manual

7
GETTING STARTED
STANDBY CONTROL
To turn the docking station on:
Press the • button.
The unit will switch on and the buttons on the top panel will
light.
To turn the docking station o:
Press the • button.
The unit will switch o. When set to Standby the lights in the
top panel buttons will switch o.
Auto Standby:
The unit will also set to standby automatically, approximately
two minutes after music has nished playing from a docked
iPod or a source connected to the Audio Input jack.
POWER CONTROL
CONNECTING POWER
Before connecting the power, check that the mains voltage
on the rating plate of the AC adaptor is the same as the
voltage in your area.
Plug the DC cord from the AC adaptor into the DC jack on •
the back of the unit.
Plug the AC adaptor into the wall socket and switch the •
mains power on.
The unit is now ready for use.
NOTE:- The AC adaptor may become warm during operation
- this is normal.
DOCKING AN iPod PLAYING FROM AN iPod
DOCKING YOUR iPod
To dock your iPod:
Set the unit to Standby.•
Check that the correct iPod adaptor is tted to the docking •
bay (see previous page).
Locate the iPod on the Docking Connector and press it •
gently home.
The iPod is now ready to play.
To remove your iPod from the dock:
Set the unit to Standby.•
Grip the iPod at the sides.•
Lift the iPod gently from the dock.•
Playing from a docked iPod:
Set the iPod to play.•
You can also operate your iPod functions from the control
panel or the remote control.
iPod playback functions:
Press the • /, button to toggle between Play and Pause
mode at any time.
Press the • } or { button on the remote control to select
the next or previous track on your iPod.
Press the • button to scroll through the repeat modes
available on the iPod.
The display on the iPod will show the repeat mode set.
Press the • button to switch shue mode on or o.
The display on the iPod will show if shue mode is set.
iPod menu functions:
When an iPod is docked and playing you can navigate the
menus from the keys on the control panel or remote control.
To move up through the iPod menu, press • Menu.
To scroll up and down options displayed on the iPod menu, •
press the M or N button.
To select menu items, press the • Enter button on the
remote control.
CHARGING AN iPod
When an iPod is docked, the iPod will begin to charge
automatically.
NOTE:- The iPod will charge at all times that the unit is
connected to mains power.