HD READY DIGITAL LCD TV OPERATING INSTRUCTIONS Please read this manual carefully before using your television and keep this manual for future reference.
CONTENTS SAFETY NOTICE Safety notice...........................................................................................................2-4 Front panel controls and connection options............................................................5 Preparation for remote control..........................................................................6 Remote control panel for TV/DTV...........................................................................7 ! Basic operation.........................
SAFETY NOTICE Please ensure that the set has adequate ventilation. Do not place the set near a heat source or in direct sunlight. SAFETY NOTICE To prevent electric shock, ensure that any external antenna connected to the set is clear of contact with any power lines. To prevent fire, do not place the unit near a damp wall. Do not put the unit near water or oil as it may cause a fire. During thunderstorms, unplug both the antenna and power plug to prevent damage.
FRONT PANEL CONTROLS AND CONNECTION OPTIONS Front control panel Source button Menu button S-VIDEO2 MENU VOL+ VIDEO Volume down/up button VOL- PREPARATION FOR REMOTE CONTROL Remote control installation 1. According to the figure display below, place the remote control with face down, then open the cover of the battery apartment. 2. As in the figure display below, install two AAA batteries. (The + and - symbol of battery must match with the marks on the remote). 3.
BASIC OPERATION REMOTE CONTROL PANEL FOR TV/DTV SWITCHING ON/OFF THE TV SET 1.First, connect power cord to the wall socket and the power indicator will light. 2.If the indicator is shown illuminated in red, press the digit buttons or CH+/- button on the remote control or STANDBY or CH+/- button on the TV set. (with the exception 0 digit) 3.If you want to exchange to standby status, please press STANDBY button on the remote control. 4.
TV PROGRAM SETTINGS SCREEN DISPLAYS For your convenient operation and in order to understand the TV set, we offer the below menus. Tuning setting menu Picture setting menu VIDEO MODE CONTRAST BRIGHTNESS COLOUR SHARPNESS COLOUR TEM. ZOOM SOFT PROGRAM NUMB. COLOUR SYS. SOUND SYS. FINE TUNE MANUAL SEARCH AUTO SEARCH EDIT PROGRAM COUNTRY 45 45 45 50 NORMAL FULL 11 PAL D/K PROGRAM NUMB. COLOUR SYS. SOUND SYS.
TV PROGRAM SETTINGS COLOUR SYSTEM 1.Press MENU button for the main menu display. 2.Press button select TUNING menu, then press button to enter. 3.Press button to select COLOUR SYS. item. 4.Press button to select the COLOUR system you need. SOUND SYSTEM 1.Press MENU button for the main menu display. 2.Press button select TUNER menu, then press button to enter. 3.Press button to select SOUND SYS. item. 4.Press button to select the sound system you need.
AUDIO CONTROL IMAGE CONTROL SET YOUR FAVOURITE VIDEO MODE 1.Press MENU button for the main menu display. 2.Press button to select PICTURE menu, press button to enter. 3.Press button to select the item that needs adjusting. 4.Press button to adjust the selected item, the detailed adjustment is as per the following table. The table of picture item adjustment effect Items Contrast Brightness Colour Sharpness Weak Dark Light Blur VIDEO MODE CONTRAST BRIGHTNESS COLOUR SHARPNESS COLOUR TEM .
FUNCTION SETTINGS BLUE SCREEN 1.Press MENU button for the main menu display. 2.Press button to select FUNCTION menu, press button to enter. 3.Press button to select BLUE SCREEN item. 4.Press button to select ON or OFF. OSD SETTING 1.Press MENU button for the main menu display. 2.Press button to select FUNCTION menu, press button to enter. 3.Press button to select OSD SETTING item, press button to enter the sub-menu. 4.Press button to select DURATION item. 5.
TIME SETTINGS TIME SETTINGS SLEEP TIMER 1.Press MENU button for the main menu display. 2.Press button to select TIMER menu, press button to enter. 3.Press button to select SLEEP TIMER item. 4.Press button to select the sleep timer you need. You can select OFF, 15,30, ......, 240. After setting, press MENU button to save and exit, the TV will start counting. Note: You can press SLEEP button on the remote controller to set the sleep timer you need. CLOCK 1.Press MENU button for the main menu display. 2.
CHILD LOCK SETTING Using this function can control the image, volume, channel and so on. Pressing H.LOCK on the remote control, it will display input password menu, the original password is 0000, after inputting, it will enter the child lock setting menu. 1.Press button to select the first item, press button to select signal input source, pressing H.LOCK button can open or lock the selected source. 2.
DTV MENU DTV MENU Favourites 1.Press button to select Favourites item, press OK button to enter. 2. Press button to select List to classify the favorite channel, for example, 1,7 is classified to List 1, 2 is classified to List 2, as figure 3. Return to the main menu, Press button to select Setting, press OK button to enter sub-menu, press to select Configuration, press OK button to enter sub-menu, press button to select Favourite Mode as figure 4.
DTV MENU DTV MENU Language 1.Press button to select Settings item, press OK button to enter. 2.Press button to select Language item, press OK button to enter. Language Settings System English Preferred -Audio English -Subtitle English Current Change OK 1026 Manual Search 1.Press button to select Manual Search item, press OK button to enter. 2.You can use the number from 0-9 to edit the channel you select. 3.
TELETEXT FUNCTION Teletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular program is being broadcast (cable networks, satellite channels, etc.). Note: The teletext buttons could be working even if there is no teletext signal, but there is no teletext display.
OTHER SETTING FUNCTIONS - HDMI TM. The HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing. -This TV can receive the High-Definition Multimedia Interface (HDMI). -This TV supports HDCP (High-bandwidth Digital Contents Protection) Protocol for 720x480p, 1280x720p and 1920x1080i resolution.
SPECIFICATIONS USING YOUR TV AS A COMPUTER DISPLAY PC input 1. Connect the PC output port in the computer to the PC port in the TV set. 2. Connect the audio cable in computer to PC AUDIO IN port in TV set. 3. Press SOURCE button to select VGA mode. 4. Turning on the computer, the screen image of the computer will display on the TV set. At this time, the TV set can be used as a computer display. The part specifications of this TV set provided here are for reference only.
SPECIFICATIONS TROUBLESHOOTING GUIDE The following problems are not always caused by hardware failure. Please use the follow troubleshooting guide before you call for service: BREAKDOWN PHENOMENON PICTURE CHECKING SOUND The direction and connection of the antenna Picture with Snow Double or Triple Image Disturb Noise Direction, station and connection of the antenna Normal Interference from electric appliance. Automobile, Motor, Vehicle, Fluorescence lamp etc.
