Operation Manual
English - 24 -
 In source menu, highlight a source by pressing “ ” 
or “ ” button and switch to that mode by pressing “
” button. Source options are; TV , DTV,  EXT-1 ,     FAV ,     
 HDMI-1 , HDMI-2  and  YPbPr    
  Note : Once you have connected optional equipment 
systems to your TV, you should select the required 
input to view pictures from that source.  
    Displaying TV Information 
   Programme Number , Programme Name , Sound 
Indicator  and Zoom Mode  information is displayed 
on the screen when a new programme is entered or 
“INFO” button is pressed.   
  Mute Function 
 Press “ ” button to disable sound. Mute indicator will 
be displayed in the upper side of the screen. 
 To cancel mute, there are two alternatives; the fi rst 
one is pressing the “
” button and the second one 
is increasing the volume level.  
     Picture Mode Selection
 By pressing PP  button, you can change Picture 
Mode  settings in accordance with your viewing 
requirements. Available options are Dynamic, Natural 
and Cinema.  
  Freezing Picture 
 You can freeze the picture on the screen by pressing 
the “ OK ” button on the remote control. Press the 
“ OK ” button to freeze picture. Press again to quit 
freeze mode.      
  Zoom Modes 
 You can change the aspect ratio (image size) of the TV 
for viewing the picture in different zoom modes.
Press SCREEN button to directly change the zoom 
mode.
Available zoom modes are listed below. 
 Note: 
In YPbPr  and HDMI  modes, while in 720p-1080i 
resolutions, only 16:9 mode is 
available. 
 Auto 
 When a WSS (Wide Screen Signalling)  signal, which 
shows the aspect ratio of the picture, is included in 
the broadcast signal or the signal from an external 
device, the TV automatically changes the ZOOM  
mode according to the WSS  signal. 
 • When the AUTO  mode does not function correctly 
due to poor WSS  signal quality or when you want to 
change the ZOOM  mode, change to another ZOOM  
mode manually. 
 16:9 
 This uniformly stretches the left and right sides of a 
normal picture (4:3 aspect ratio) to fi ll the wide TV 
screen. 
 • For 16:9 aspect ratio pictures that have been 
squeezed into a normal picture (4:3 aspect ratio), 
use the 16:9  mode to restore the picture to its 
original shape. 
 4:3 
 Use to view a normal picture (4:3 aspect ratio) as this 
is its original size. 
 Panoramic 
 This stretches the left and right sides of a normal 
picture (4:3 aspect ratio) to fi ll the screen, without 
making the picture appear unnatural. 
 The top and bottom of the picture are slightly cut off. 
 14:9 
 This zooms up the wide picture (14:9 aspect ratio) to 
the upper and lower limits of the screen. 
MB25_[GB]_(01-TV)_COST_1055UK_IDTV_32855W_BRONZE12_10063137_50153024.indd 24MB25_[GB]_(01-TV)_COST_1055UK_IDTV_32855W_BRONZE12_10063137_50153024.indd 24 16.08.2009 11:42:4916.08.2009 11:42:49
Downloaded from www.Manualslib.com manuals search engine 










