Operation Manual
English - 23 -
 Colour System 
 Press “ ” or “ ” button to select Colour System . Use 
“ ” or “ ” button to change the colour system to PAL, 
SECAM, PAL60, AUTO, NTSC 4,43 or NTSC 3,58.  
 Store 
 Press “ ” or “ ” button to select Store Programme . 
Press “ ” or OK  button to store the settings. 
“ Stored... ” will be displayed on the screen. 
 Program Table 
 Select Program Table  by pressing “ ” or “ ” button. 
Press “ ” to display Program Table: 
 By moving the cursor in four directions you can reach 
20 programmes in the same page. You can scroll the 
pages up or down by pressing the navigation buttons 
to see all the programmes in TV mode (except for the 
AV modes). By cursor action, programme selection is 
done automatically. 
 Name 
 To change the name of a programme, select the 
programme and press the RED  button.
The fi rst letter of the selected name will be highlighted. 
Press “
” or “ ” button to change that letter and “ ” 
or “ ” button to select the other letters. By pressing 
the RED  button, you can store the name. 
Move
 Select the programme which you want to move by 
navigation buttons. Press the GREEN  button. By 
navigation buttons move the selected programme to 
the decided programme space and press the GREEN  
button again. 
 Delete 
 To delete a programme, press the YELLOW  button. 
Pressing the YELLOW  button again erases the 
selected programme from the programme list, and 
the following programmes shift one line up. 
 APS (Auto Programming System) 
 When you press the BLUE  button for starting 
automatic tuning,  Auto Programming System  menu 
will appear on the screen: 
 Country 
 Press “
” or “ ” button to select your country. If you 
want to exit from A.P.S. function, press the BLUE  
button.
When you press  OK  or RED  button for starting 
automatic tuning, all stored programmes will be erased 
and the TV will search for available channels. During 
the search, the following OSD will be displayed: 
 Whenever you press the BLUE  button, APS function 
stops and Program Table  appears on the screen.
If you wait until the end of APS, Program Table will be 
displayed with the programmes found and located.  
  Source Menu 
 Press “ ” or “ ” button and select the sixth icon. 
Then press “ ” or OK  button. Source menu appears 
on the screen: 
MB25_[GB]_(01-TV)_COST_1055UK_IDTV_32855W_BRONZE12_10063137_50153024.indd 23MB25_[GB]_(01-TV)_COST_1055UK_IDTV_32855W_BRONZE12_10063137_50153024.indd 23 16.08.2009 11:42:4816.08.2009 11:42:48
Downloaded from www.Manualslib.com manuals search engine 










