UK DVD Player User Guide DVDFAW08 Technika DVDFAW08 1B V01.
Technika DVDFAW08 1B V01.
User Guide CONTENTS INTRODUCTION .............................. 2 SPECIAL DVD FUNCTIONS ............ 14 Safety is Important ................................. 2 Menu ................................................... 14 Title ...................................................... 14 Subtitles ............................................... 14 Audio ................................................... 14 Zoom ................................................... 15 Search ....................................
DVD Player DVDFAW08 INTRODUCTION Thank you for purchasing this Technika DVD player which has been designed and manufactured to give you many years of trouble-free service. You may already be familiar with using a similar product but please take time to read these instructions which have been written to ensure you get the very best from your purchase. Safety is Important To ensure your safety and the safety of others, please read the Safety precautions BEFORE you operate this product.
User Guide SAFETY INFORMATION This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this product. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this product. These labels tell you that the product contains a laser component. Do not stare at the laser lens. Power Source • This product requires a 110-240V AC, 50/60Hz mains supply. Do not use any other supply.
DVD Player DVDFAW08 • This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, this is no guarantee that interference will not occur in a particular installation.
User Guide How Do I Dispose of This Product? UK: Waste electrical products should not be disposed of with household waste. Separate disposal facilities exist, for you nearest facilities see www.recycle-more.co.uk or instore for details. ROI: Produced after 13th August 2005 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
DVD Player DVDFAW08 PARTS IDENTIFICATION Front View q w ert y Rear View u i o 1. Standby On/Off 6. Remote Control Sensor 2. Disc Tray 7. Mains Cable 3. Open/Close 8. 2 Channel Audio Output 4. Play/Pause 9. SCART Output 5. Stop 6 Technika DVDFAW08 1B V01.
User Guide Remote Control 1. OPEN/CLOSE Opens and closes the disc tray 2. ANGLE Switches between camera angles 3. OSD Switches the On Screen Display (OSD) on or off q 4. SUBTITLE Switches the subtitles on or off w 5. TITLE/PBC Returns to the title menu of the disc e 6. SEARCH Used to jump to a specific point on the disc 7. REPEAT Repeats chapter, track or title 8. A-B RPT Repeats a user defined section of the disc r t y u i o 9. SETUP Opens the setup menu 10.
DVD Player DVDFAW08 GETTING STARTED Connecting to the TV The Quick Start Guide shows how to connect your DVD player to your television. These methods are described below. SCART lead The SCART lead (not supplied) should be used to connect your DVD player to your TV. This connection uses component video signals i.e. the red, green and blue (RGB) content of the video are sent as separate signals. This gives an excellent quality video signal.
User Guide Switching the DVD Player On and Off Your DVD player requires a mains supply of 110-240 V AC at 50/60Hz. Please ensure that your mains supply is compatible. 1. Unwind the mains cable and insert the mains plug into the mains outlet socket and switch on. 2. To turn the DVD player on, press the Standby On/Off button on the front of the DVD player. The Standby button on the Remote Control works in the same way as the Standby On/Off button on the front of the DVD player.
DVD Player DVDFAW08 INSERTING A DISC Ensure the DVD player is connected to the mains supply and correctly connected to your television. 1. Press the Standby On/Off button on the front of your DVD player or alternatively the Standby button on the Remote Control. The screen displays the static TECHNIKA DVD logo. 2. Press the Open/Close button on the front of the DVD player or the Remote Control to open the DVD disc tray. In the top right of the TV screen, ’Open’ will be displayed. 3.
User Guide Compatible Discs Your DVD player can play discs that are marked with the following logos: 8cm/12cm DVD Video Discs. 12cm Compact Disc Recordable Discs. 12cm Compact Disc Re-Writable Discs. 8cm/12cm Compact Disc Audio Discs. 12cm Photo Compact Discs. Kodak Picture Compact Discs. Region code If the region code of the disc being played does not match the region code of this DVD player then the disc cannot be played. If you do try to do this a region violation notice will appear on the screen.
DVD Player DVDFAW08 DVD PLAYER FUNCTIONS NOTE: Unless otherwise stated, all references to buttons refer to the remote control. Playing DVDs When you load a DVD it will start to play automatically, most will stop at the Title menu. This enables you to select from various play options, such as different titles, trailer, and language options. The options available are dependent on the DVD. Normally you will need to press the Play button. Pause Play 1. Press the Pause/Step button to pause play.
User Guide Skip to the Next/Previous Chapter You can skip to the next or previous chapter during playback. 1. Press the Next button to skip to the next chapter. Playback continues at the beginning of the next chapter and ’ I’ will be briefly displayed in the top right of the screen. 2. Press the Prev button to skip to the beginning of the current chapter. Playback continues at the beginning of the current chapter and ’I ’ will be briefly displayed in the top right of the screen. 3.
DVD Player DVDFAW08 SPECIAL DVD FUNCTIONS NOTE: The functions described in the following sections may not be supported on all DVD discs. Refer to the DVD packaging for details of supported features and availability of languages and subtitles etc. Menu The DVD main menu provides numerous playback, setup and language options. 1. To access the DVD main menu, press the Menu button at any time during playback. In the top right of the TV screen, ‘Root Menu’ will be briefly displayed before the main menu appears.
User Guide NOTE: The Audio button overrides any selections made in the setup menus. Zoom The Zoom function allows you to magnify the picture displayed on the TV screen. 1. Press the Zoom button to magnify the picture. 2. Each press of the Zoom button steps through the three available magnifications. These are x2, x4 and Off. The magnification will be displayed in the top right of the TV screen after each press of the button as ‘Zoomx2’, ‘Zoomx4’ and ‘Zoom Off’. 3.
DVD Player DVDFAW08 Elapsed Time Search 1. To perform an elapsed time search, press the Search button twice. In the top left of the TV screen, the following search panel will be displayed. 01 / 15 _:__:__ 2. Using the Numeric buttons, enter the elapsed time. This should be in an Hours, Minutes and Seconds format. For example to enter a time of 1 hour, 25 minutes and 20 seconds, press the 1 button followed by the 2, 5, 2, and 0 buttons. 3. Press the Play button.
User Guide On Screen Display (OSD) The OSD provides information on the current title, chapter, time, audio track and subtitles. 1. Press the OSD button to show the OSD. The OSD appears in the top of the TV screen as shown below. : 1 / 15 : 1 / 27 Time Elapsed 00 : 00 : 30 2. Press the OSD button repeatedly to cycle through the following OSD information. • Title time elapsed • Title time remaining • Chapter time elapsed • Chapter time remaining • Current Subtitle and Audio Track 3.
DVD Player DVDFAW08 4. Press the Up or Down Arrow button to select the title number. 5. Press the Right Arrow button to program the chapter. 6. Press the Up or Down Arrow button to select the chapter number. 7. Press the Play button to set the first programmable slot. 8. Repeat steps 2 through 7 to program the next slots. 9. If you make a mistake while programming a slot, press the Clear button to delete your selections. 10. Press the Play button to begin playback of the programmed chapters. 11.
User Guide Repeat The Repeat function allows you to automatically replay a specific track or the entire CD. 1. Each press of the Repeat button cycles through the available repeat options. These are Track, All and Off. 2. To repeat a Track, press the Repeat button once. In the top right of the TV screen ‘ be displayed. Track will 3. To repeat the entire CD, press the Repeat button twice. In the top right of the TV screen ‘ will be displayed. 4.
DVD Player DVDFAW08 6. Repeat steps 2 through 5 to program the next track. 7. If you make a mistake while programming a slot, press the Clear button to delete your selections. 8. Press the Play button to begin playback of the programmed tracks. 9. To cancel the Program function, press the Stop button twice at any time. NOTE: If the CD is removed from the DVD player, the Program function will be cancelled. Search You can search to a specific point in the CD by defining the elapsed time. 1.
User Guide Accessing the Photo CD contents The files and folders on the Photo CD can be accessed at any time, allowing you to browse and locate specific images or photos. 1. Press the Menu button to access the root menu of the Photo CD. The root menu will be shown as displayed below. 2. Press the Left and Right Arrow buttons to switch between the folder pane on the right hand side of the screen and the contents pane on the left hand side of the screen.
DVD Player DVDFAW08 Image Manipulation The Image Manipulation feature allows you to rotate the displayed photo in 90 degree steps clockwise or anti-clockwise or flipped horizontally or vertically. 1. Press the Right Arrow button to rotate the photo 90 degrees clockwise. In the top right hand corner of the screen, ‘Rotate Right 90º’ will be displayed. 2. Press the Left Arrow button to rotate the photo 90 degrees anti-clockwise. In the top right hand corner of the screen, ‘Rotate Left 90º’ will be displayed.
User Guide Language Setup The Language Setup menu allows you to select the language options for the OSD and the DVD Menu, audio track and subtitles. OSD This menu allows you to set the OSD language. The available options are: • English • Polish • Czech Language Setup English OSD Menu Audio Czech Subtitle Slovak • Slovak Polish Hungarian • Hungarian • Turkish Menu This menu allows you to set the DVD menu language.
DVD Player DVDFAW08 Subtitle This menu allows you to set the DVD subtitle language. The available subtitle languages will be dependent on the DVD disc loaded. Screen Setup Language Setup OSD English Menu Chinese Audio Japanese Subtitle French The Screen Setup menu allows you to adjust the DVD player and TV screen settings to suit your viewing preferences. German : Select TV Type This menu allows you to set the aspect ratio to suit your TV.
User Guide Video Output This menu allows you to select the video output type. The only option available is SCART. Brightness Screen Setup TV Type Screen Saver TV System Video Output Brightness Contrast SCART This menu allows you to select one of three brightness levels. The available options are: • Normal - This option should be selected for viewing standard images.
DVD Player DVDFAW08 Audio Setup The Audio Setup menu allows you to adjust the audio output format. Downmix This menu allows you to select either Stereo output or Lt/Rt. The Lt/Rt option should be set when the DVD player is connected to an external sound system such as a Stereo or Surround Sound System. When set, the left and right audio outputs are separated and sent to the external sound system individually.
User Guide Password This menu allows you to set the Parental Control password. 1. To change the password, use the Up and Down Arrow buttons to highlight Password in the Custom Setup menu. 2. Press the Right Arrow button to set the password. The Password screen is displayed. 3. Using the Numeric buttons, enter the old password. The default password is ‘9922’. Custom Setup Parental Ctrl Password ...
DVD Player DVDFAW08 Default Default This menu allows you to reset the DVD player to the default factory settings. Default Restore Default NOTE: It does not change the Password or Parental Control settings. : Select HELP AND ADVICE Problem The DVD player will not power up. Disc does not play. No picture. No sound. The picture quality is poor. Probable cause Ensure that the plug is connected to the mains socket and switched on. Replace the fuse in the plug.
User Guide CARE AND MAINTENANCE Handling Discs • To remove a disc from its storage case, press down on the centre of the case and lift the disc out. • Discs should be returned to their cases after use. This avoids serious scratches that could cause the laser pickup to skip. • Hold the disc by the edges, to avoid touching the recorded side of the disc. • Fingerprints and dust should be carefully wiped from the disc’s surface with a soft cloth.
DVD Player DVDFAW08 TECHNICAL SPECIFICATION Power Supply 110-240V AC at 50/60Hz Power Consumption 12W Physical Disc Sizes 12cm and 8cm Video Signal System PAL and NTSC WARRANTY Your Tesco appliance is covered by a warranty for 12 months from the date of purchase. If a fault develops during this period, please contact the Tesco electrical help line on 0845 456 6767. Please have your original purchase receipt with you when you call. This warranty in no way affects your consumer rights.
User Guide 31 Technika DVDFAW08 1B V01.
UK TESCO Stores Ltd, Cheshunt, EN8 9SL, UK. Technika DVDFAW08 1B V01.
