Operation Manual
7
English
Control reference guide
∫ Front
1 Unit on/off button [ ]
Use this button to turn the unit on and off.
[ ] (off): The unit is off.
[ ] (on): The unit is on.
≥ The unit is still using a small amount of power in off mode. Off
mode uses less power. (> 26)
2 Port for iPhone/iPad/iPod and USB devices (> 16, 17)
3 Power indicator
The colour of the indicator changes according to the
status of this unit.
4 Remote control signal sensor
Distance: Within approx. 7 m directly in front
Angle: Approx. 30o left and right
5 Volume knob
Adjust the volume of the headphones or the SE-R1. (
>
13)
≥ It is not possible to adjust the volume of devices connected to
the analogue or digital audio output terminals.
≥ The speed at which the volume is adjusted varies depending
on how fast you turn the knob.
6 Display
≥The input source, playback status and other information
are displayed. For more details, check the support site
below as well as these operating instructions.
www.technics.com/support/
7 Basic control buttons
≥ Press and hold [RETURN] on the unit to display the HOME
menu. (> 13)
8 Headphones jack
For connecting a headphone plug.
≥ Excessive sound pressure from earphones and headphones
can cause hearing loss.
≥
Listening at full volume for long periods may damage the user’s ears.
9 Multi-control knob (> 13)
≥
Turn this knob clockwise or anticlockwise to switch the input
source, scroll through items, and skip during playback.
≥To set an item, press the knob; to enter the menu
screen, press and hold it.
∫ Rear
: Analogue audio output terminals [UNBALANCED]
(> 10)
; Analogue audio input terminals [LINE1]/[LINE2]
(> 10)
< System terminal [Technics Digital Link OUT] (> 9)
= Product identification marking
The model number is indicated.
> Analogue audio output terminal [BALANCED] (> 10)
? Digital audio output terminal [AES/EBU] (> 11)
@ Digital audio output terminal [COAXIAL] (> 11)
A Digital audio output terminal [OPTICAL] (> 11)
B Digital audio input terminal [AES/EBU] (> 11)
C Digital audio input terminals
[COAXIAL1]/[COAXIAL2]/[COAXIAL3] (> 11)
D Digital audio input terminal [
OPTICAL
] (> 11)
E LAN port [LAN] (> 14)
F Digital audio input terminal [PC] (> 19)
For connecting to a PC, etc.
G AC IN terminal [AC IN T] (> 12)
This unit
Blue The unit is on.
Red The unit is in standby mode.
1/; Play/Pause
RETURN Return to the previous display
(7)
SU-R1-SQT0463_EBEG_mst.book 7 ページ ２０１５年６月１８日 木曜日 午前１１時５４分