Operation Manual

22
Occasionally, Panasonic may release updated firmware for
this unit that may add or improve the way a feature operates.
These updates are available free of charge.
Preparation
≥Connect this unit to the network. (> 14)
– Make sure that the network is connected to the Internet.
1 Press [SETUP].
2 Press [3, 4] repeatedly to select “F/W
Update” and then press [OK].
3 Press [3, 4] to select “Yes” and then press
[OK].
≥When the update has finished successfully, “Success” is
displayed.
4 Disconnect the AC mains lead and
reconnect it after 3 minutes.

≥ If there are no updates, “No Need” is displayed after step 3.
≥ Downloading will require several minutes. It may take longer or
may not work properly depending on the connection environment.
∫ Checking the firmware version
1 Press [SETUP].
2 Press [3, 4] repeatedly to select “F/W Version” and
then press [OK].
≥ Press [OK] to exit.
When other equipment responds to the supplied remote
control, change the remote control code.
≥ The factory default is “Mode 1”.
Point the remote control at this unit, and press
and hold [OK] and the numeric button for at least
4 seconds.
≥When the remote control code is changed, the new code
will appear on the display for a few seconds.
You can change the character encoding of track names,
artist names and other information when they are not
displayed as they should be.
≥ The factory default is “Type 1( 日本 )”.
1 Press [SETUP].
2 Press [3, 4] repeatedly to select “E Asian
Character” and then press [OK].
3 Press [3, 4] to select
“Type 1( 日本 )”/“Type 2( 简体字 )” and then
press [OK].
Firmware updates
Do not disconnect the AC mains lead or press the unit
on/off button to the [ ] position while one of the
following messages is displayed.
“Linking” or “Updating”
≥ During the update process, no other operations can be
performed.
Remote control code
[OK] + [1] Set the code to “Mode 1”
[OK] + [2] Set the code to “Mode 2”
Changing the character
encoding
Type 1( 日本 )
Priority is given to Japanese.
Type 2( 简体字 )
Priority is given to Chinese
(Simplified).
(22)
SU-R1-SQT0463_EBEG_mst.book 22 ページ ２０１５年６月１８日 木曜日 午前１１時５４分