Operation Manual

13
Control reference guide
01 Standby/on switch ( )
• Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
02 Power indicator
• Blue: The unit is on.
• Red: The unit is in standby mode with the following status.
- Network standby function is available. ( 37)
- Charging an iPhone/iPad/iPod ( 27)
• Off: The unit is in standby mode with no function available.
03 Remote control signal sensor
• Distance: Within approx. 7 m directly in front
• Angle: Approx. 30° left and right
04 [SELECT]/[
], [ ], [ ], [ ]:
Switch the input source ( 30, 31, 32)/
Basic control buttons ( 24)
• These switches work just by touching the marks. Each time you
touch the switch, there will be a beep sound. ( 36)
05 Display
• Input source, playback status, etc. are displayed. For details, visit:
www.technics.com/support/
06 USB-A terminal
• Port for iPhone/iPad/iPod and USB devices ( 26, 27)
07 Headphones jack
• When a plug is connected, the speakers do not output sound.
• Excessive sound pressure from earphones and headphones can
cause hearing loss.
• Listening at full volume for long periods may damage the user’s
ears.
08 Adjust volume
• 0 (min) to 100 (max)
09 Top cover ( 24)
10 Optical digital input terminal ( 30)
11 LAN terminal ( 18)
12 USB-B terminal
• For connecting to a PC, etc. ( 31)
13 Speaker output terminals ( 16)
14 AC IN terminal ( 17)
15 Product identification marking
• The model number is indicated.
16 Wireless LAN antenna ( 19
)