Operation Manual
24
  Operations
   Playing back music files on the DLNA server
5V 2.1APHONES
VOLUME
INPUT SELECTOR
 You can share music files stored in the DLNA Certified media server (PC, Network 
Attached Storage, etc.) connected to your home network, and enjoy the contents 
with this unit.
 ■  Preparation
 •  Complete the network settings. ( 18)
 •  Connect the device to be used to the 
same network as this unit.
 •  To use Windows Media
®
 Player
 - Add the contents and folder to the 
libraries of the Windows Media
®
 Player 
11 or 12, or a smartphone, etc.
 - Playlist of Windows Media
®
 Player can 
play back only the contents that are 
stored in the libraries.
 - To use Windows Media
®
 Player for 
streaming, you need to configure it in 
advance.
  Playing back content stored on the 
DLNA server by controlling it from 
this unit
 1 Press [NET] to select “DMP”.
 •  The server selection screen will be displayed.
 •  You can also select the input source by 
turning the input selector knob on the unit.
 2 Press [ ], [ ] to select a DLNA server 
on the network, and then press [OK].
 •  The folder/content selection screen will be 
displayed. Repeat this step to make further 
selections.
 •  Folders/content may be displayed in 
different order from the order on the server, 
depending on its specifications.
 3 Press [ ], [ ] to select an item and 
then press [OK].
 Note
 •  The connected server and its contents may 
not be displayed properly depending on its 
condition. (e.g. soon after adding the contents 
to the server, etc.)
 Please try again later. For details, refer to the 
operating instructions of the device.
  Operations during playback
 Stop  
 Pause
 •  Press again to restart play.
 Skip  
 Search    
 Viewing 
available 
information
 [INFO]
  Repeat playback
 “Repeat”
 1 Press [MENU].
 2 Press [
], [ ] repeatedly to select 
“Repeat” and then press [OK].
 3 Press [ ], [ ] to select an item and 
then press [OK].
 1-Track:
 Only plays the selected track. (“1
” is 
displayed.)
 All:
 All tracks are repeated. (“ ” is displayed.)
 •  Setting is available even when the input source 
is switched to “USB” ( 28).










