Operation Manual

17
Connections
KERS
1
6Ω)
AC IN ∼
AC mains lead connection
Connect only after all other connections are
completed.
• Wireless LAN (Wi-Fi
®
) setting may start when
this unit is turned on. If you stop the Wi-Fi
setting, select “Off” in “Wi-Fi Setup” screen.
Select “On” to keep the Wi-Fi setting. ( 19)
Note
• This unit consumes a small amount of AC power
( 48) even when the unit is in standby mode.
Remove the plug from the main electrical outlet
if you will not be using the unit for an extended
period of time. Place the unit so the plug can be
easily removed.
Speaker cable (not supplied)
AC mains lead (supplied)
To a household
mains socket
Insert the AC mains lead up to a
point just before the round hole.
Output correction function (LAPC)
You can make the optimum adjustment
according to your own speakers.
• When you select “Off” in “Wi-Fi Setup”, you
can set LAPC function ( 39).
• When you select “On” in “Wi-Fi Setup”, set the
wireless LAN connection first, and you can set
LAPC function ( 39).