Operation Manual

11
HOME menu and basic operations
Major functions of this unit can be operated from the HOME
menu.
Preparation
≥Prepare the music that you want to play back.
≥Turn on the connected device (amplifier, etc.) and lower its
volume.
1 Raise the power switch lever of this unit to
the [Í/I] position.
2 Press [NWP].
3 Press [HOME].
4 Press [3, 4] to select an item and then
press [OK].
≥If there are any other items, repeat this step.
*“DAB+”
5 Start play.
∫ To display HOME menu
Press [HOME].
Adjust the volume of the connected device (amplifier, etc.).
The brightness of this unit’s display and the basic control
switches can be changed.
Press [DIMMER] repeatedly.

≥ When the display is turned off, it will light up only when you
operate this unit.
Before the display turns off again, “Display Off” will be displayed
for a few seconds.
You can turn the beep sound on/off.
≥ The factory default is “On”.
1 Press [NWP].
2 Press [HOME].
3 Press [3, 4] repeatedly to select “SETUP”
and then press [OK].
4 Press [3, 4] repeatedly to select “Beep”
and then press [OK].
5 Press [3, 4] to select “On”/“Off” and then
press [OK].
If you install the dedicated app “Technics Music App” (free of
charge) on your tablet/smartphone, you can control this unit
and the SU-C700 using a wide variety of functions.
For details, visit:
www.technics.com/support/
LAN
Connects this unit to a network and
plays back music over it. (> 13)
USB
Plays back music stored on a USB
device or an iPhone/iPad/iPod.
(> 14, 15, 16)
PC
Plays back music stored on a PC,
etc. (> 17)
Bluetooth
Connects this unit to a Bluetooth
®
device and plays back music stored
on it. (> 18, 19)
FM FM (> 20)
DAB/DAB+* DAB/DAB+ (> 21)
SETUP (> 11, 12, 22, 23, 24, 25)
ラヰヮユ
ヶヴャ
ヒバヘ
ロモワ
Adjusting the volume
Display brightness
Operation sound setting
Operations using the
dedicated app “Technics
Music App”
ST-C700-SQT0492_EBGN_mst.book 11 ページ ２０１５年６月１５日 月曜日 午前９時１６分