Operating Instructions

18
Using Bluetooth
®
You can listen to the sound from the Bluetooth
®
audio device from this unit wirelessly.
≥ Refer to the operating instructions of the Bluetooth
®
device for details.
≥ If you intend to use an NFC (Near Field Communication)-compatible Bluetooth
®
device, proceed to “Connecting by NFC”.
Preparation
≥Turn on the Bluetooth
®
feature of the device and place the
device near this unit.
1 Press [NWP].
2 Press [N INPUT O] below [NWP] repeatedly
to select “Bluetooth”.
3 Press [MENU].
4 Press [3, 4] repeatedly to select “Pairing”
and then press [OK].
5 Press [3, 4] to select “Yes” and then press
[OK].
≥“Pairing” is indicated on the display.
6 Select “ST-C700” from the Bluetooth
®
device’s Bluetooth
®
menu.
≥The name of the connected device is indicated on the
display.

≥ If prompted for the passkey, input “0000”.
≥ You can register up to 8 devices with this unit. If a 9th device is
paired, the device that has not been used the longest will be
replaced.
For NFC-compatible Bluetooth
®
devices (Android™
devices with version 4.1 or later) only
With the touch of an NFC (Near Field Communication)-
compatible Bluetooth
®
device to this unit, you can complete a
series of steps from registering a Bluetooth
®
device to
connecting it to this unit.
Preparation
≥Turn on the NFC feature of the device.
1 Press [NWP].
2 Press [N INPUT O] below [NWP] repeatedly
to select “Bluetooth”.
3 Press [MENU].
4 Press [3, 4] repeatedly to select “NFC” and
then press [OK].
5 Press [3, 4] to select “Yes” and then press
[OK].
6 Touch and hold your device on the NFC
touch area of this unit within 20 seconds.
(> 7)
≥Do not move the Bluetooth
®
device until it displays a
message or reacts in some way.
Once the Bluetooth
®
device has reacted, move the
device away from this unit.
– When the connection of the Bluetooth
®
device is complete,
the name of the connected device is indicated on the
display.
– The location of the NFC touch area differs depending on the
device. When a connection cannot be established even if
your Bluetooth
®
device has touched the NFC touch area of
this unit, change the position of the device.

≥ If you connect another NFC-compatible Bluetooth
®
device, the
previously connected device will be disconnected automatically.
≥ When the connection is established, playback may start
automatically depending on the type of device being used.
≥ Connecting by NFC may not work properly depending on the type
of device being used.
≥ Do not make an NFC connection in any other way than instructed
in the Owner’s Manual. Doing so may cause malfunction.
Connecting via Bluetooth
®
menu
Connecting by NFC
ST-C700-SQT0495_PP_mst.book 18 ページ ２０１５年１月７日 水曜日 午前１０時３６分