Owner's Manual
Table Of Contents
- Operating Instructions
- Read first
- Table of contents
- Features
- Accessories
- Control reference guide
- Connections
- Operations
- Settings
- Sound adjustment
- Adjusting the volume of headphones "PHONES VOL”
- Using this unit exclusively for the playback of CDs "Pure Disc Playback”
- MQA decoding "MQA Decoding”
- Enabling the native playback for DSD signal "DSD Native”
- Disabling audio output "Digital Output”/“Analog Output”
- Setting the sampling frequency "D.Output fs”
- Setting the analogue audio output "A.Output Level”
- Adjusting the sound quality of analogue audio output "Filter”
- Setting the limitation ofheadphones output "PHONES VOL Limitation”
- Playing back CD more natural-sounding audio
- Direct mode
- Other settings
- Using the favourite function
- System control connection
- Sound adjustment
- Others
58
Operations
Playing Internet Radio and
Podcasts
(Continued)
This unit supports an audio broadcasting
service transmitted via the Internet, and
Internet Radio and Podcasts can be played
back.
■
Preparation
• Complete the network settings. (⇒ 28)
Make sure that the network is connected to the
Internet.
1 Press [NWP].
2 Press [>INPUT<] repeatedly to select
“Internet Radio” / “Podcasts”.
• You can also select the input source by turning
the multi control knob after pressing [INPUT] on
the unit.
• When “Internet Radio” / “Podcasts” is selected
as the source, this unit will automatically try and
connect to the last selected station.
3 Press [ ], [ ] to select a station and
then press [OK].
• Repeat this step to make further selections
according to the genre, region, etc.
• The station that does not broadcast cannot be
played back. (It will be skipped or return to the
list.)
Note
• The Internet Radio service may be suspended or
be otherwise unavailable without notice.
• Internet Radio may not be played back properly
depending on the network condition.