Operating Instructions Network/ Super Audio CD Player SL-G700
Music is borderless and timeless, touching people’s hearts across cultures and generations. Each day the discovery of a truly emotive experience from an unencountered sound awaits. Let us take you on your journey to rediscover music. Delivering the Ultimate Emotive Musical Experience to All At Technics we understand that the listening experience is not purely about technology but the magical and emotional relationship between people and music.
Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. •• About descriptions in these operating instructions Pages to be referred to are indicated as “⇒ ○○”. Unless otherwise indicated, operations are described using the remote control. The illustrations shown may differ from your unit. •• Illustrations and figures in this manual are of the silver main body.
Table of contents Read first 06 Please carefully read the “Safety precautions” of this manual before use. Control reference guide 15 This unit, Remote control Connections 24 AC mains lead connection, Network settings Operations 37 Playing back CD/SACD, etc. Settings 75 Sound adjustment, Other settings Others 91 Troubleshooting, Specifications, etc.
Accessories AC mains lead (2) Except for Switzerland K2CM3YY00041 For Switzerland K2CS3YY00033 System connection cable (1) K2KYYYY00233 Analogue audio cable (1) K2KYYYY00257 Remote control (1) N2QAYA000143 Batteries for remote control (2) •• Product numbers provided in these operating instructions are correct as of April 2019. •• These may be subject to change. •• Do not use AC mains lead with other equipment.
Read first Safety precautions................................ 07 Warning..................................................... 07 Caution...................................................... 07 Installation............................................ 13 Installation..................................................13 Unit care.....................................................13 Using “Technics Audio Center”....................13 Firmware updates.......................................
Read first Safety precautions Warning Unit •• To reduce the risk of fire, electric shock or product damage, Do not expose this unit to rain, moisture, dripping or splashing. Do not place objects filled with liquids, such as vases, on this unit. Use the recommended accessories. Do not remove covers. Do not repair this unit by yourself. Refer servicing to qualified service personnel. Do not let metal objects fall inside this unit. Do not place heavy items on this unit.
Placement •• Place this unit on an even surface. •• To reduce the risk of fire, electric shock or product damage, Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. Do not expose this unit to direct sunlight, high temperatures, high humidity, and excessive vibration. •• Do not lift or carry this unit by holding the knobs or antenna.
(Inside of product) (Produktets innside) For the United Kingdom and Ireland customer Caution for AC Mains Lead (For the AC mains plug of three pins) For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 10-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 10-ampere and that it is approved by ASTA or BSI to BS1362.
2. Replace the fuse and close or attach the fuse cover. Figure A Figure B Fuse (10 ampere) Fuse (10 ampere) NORSK ADVARSEL Produkt •• For å redusere faren for brann, elektrisk støt eller skade på apparatet : Utsett ikke produktet for regn, fukt, drypping eller sprut. Ikke plasser objekter som er fylt med væske, som vaser, på apparatet. Bruk anbefalt tilbehør. Fjern ikke deksler. Reparer ikke denne enheten selv, overlat service til kvalifisert servicepersonell.
Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.
Declaration of Conformity (DoC) Hereby, “Panasonic Corporation” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Customers can download a copy of the original DoC to our RE products from our DoC server: http://www.ptc.panasonic.
Read first Installation Installation Turn off all the equipment before connection and read the appropriate operating instructions. Be sure to raise this unit when moving, and do not drag this unit. Unit care Pull out the AC mains lead from the socket before maintenance. Clean this unit with a soft cloth. •• When dirt is heavy, wring a wet cloth tightly to wipe the dirt, and then wipe it with a soft cloth. •• Do not use solvents including benzine, thinner, alcohol, kitchen detergent, chemical wiper, etc.
To dispose of or transfer this unit Before disposing of or transferring this unit, be sure to erase all the recorded information by restoring the settings to factory default. Press [NWP] while this unit is turned on. Press [SETUP]. Press [ ], [ ] repeatedly to select “Initialization” and then press [OK]. Press [ ], [ ] to select “Yes” and then press [OK]. •• A confirmation screen appears. Select “Yes” in the following steps to restore all the settings to defaults. Press [ ], [ [OK] again.
Control reference guide This unit (front)..................................... 16 This unit (rear)....................................... 18 Remote control..................................... 19 Using the remote control........................... 22 Remote control mode................................ 22 Table of contents ...
Control reference guide This unit (front) 01 01 02 03 04 05 06 07 08 09 10 11 12 01 [ ] Standby/on button •• Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 02 Power indicator •• Blue: The unit is on. •• Red: The unit is in standby mode. •• Off: The unit is off. 03 Headphones jack •• Excessive sound pressure from earphones and headphones can cause hearing loss.
10 Multi control knob •• Turn this knob clockwise or anticlockwise to switch the input source and scroll through items. •• To set an item, press the knob; to enter the setup screen, press and hold it. 11 Input selector button •• Switch the input source. 12 Headphone volume button •• Headphone volume is displayed. Volume can be adjusted with the multi control knob while displaying. (The volume buttons of remote control are not available for adjusting the headphone volume.
Control reference guide This unit (rear) 01 02 03 04 05 06 07 02 08 09 10 11 01 Analogue audio output terminals (ANALOG OUT) (⇒ 25) 02 Wireless LAN antenna (⇒ 30) 03 Optical digital output terminal (OPT) (⇒ 26) 04 Coaxial digital output terminal (COAX) (⇒ 26) 05 Optical digital input terminal (OPT) (⇒ 49) 06 Coaxial digital input terminal (COAX) (⇒ 49) 07 Product identification marking •• The model number is indicated.
Control reference guide Remote control 01 01 02 02 03 03 04 05 10 06 11 07 04 08 12 13 09 15 14 01 [NWP ]/[CD ]: Standby/on button •• Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. The input source also switches for each selector (switches to the last selected input source when [NWP ]).
04 [DIMMER]: Adjust the brightness of the power indicator, display, etc.*2 •• When the display is turned off, it will light up for a few seconds only when you operate this unit. Before the display turns off, “Display Off” will be displayed for a few seconds. •• Press repeatedly to switch the brightness. 05 [INFO]: View content information*1 •• The sound setting information is displayed such MQA Decoding, RE-MASTER, etc. by pressing and holding [INFO].
04 Measure the output signal when speakers are connected, and correct its output 21 (Continued)
Using the remote control 2 1 R03/LR03, AAA (Alkaline or manganese batteries) Note •• Insert the battery so the terminals ( and ) match those in the remote control. •• Point it at the remote control signal sensor on this unit. (⇒ 16) •• Keep the batteries out of reach of children to prevent swallowing. Remote control mode When other equipment responds to the supplied remote control, change the remote control mode. •• The factory default is “Mode 1”. 1 Press [NWP]. 2 Press [SETUP].
■■When “Remote 1” or “Remote 2” is displayed When “Remote 1” or “Remote 2” is displayed, the remote control modes of this unit and remote control are different. Perform step 4 above.
Connections Connecting to an amplifier.................. 25 Connecting to an amplifier......................... 25 Connecting to an amplifier with digital input terminal............................ 26 Connecting to an amplifier with digital input terminal.................................. 26 AC mains lead........................................ 27 AC mains lead connection.......................... 27 Network settings.................................. 28 Wired LAN connection..............................
Connections Connecting to an amplifier You can output analogue audio signals from this unit and play back music. Connecting to an amplifier XLR cable* (not supplied) Analogue audio cable (supplied) Amplifier with balanced input terminals Amplifier with unbalanced input terminals Amplifier *: We recommend using cables with a length of 3 m or less. •• For details, refer to the operating instructions of the connected device. •• Do not use any other analogue audio cables except the supplied one.
Connections Connecting to an amplifier with digital input terminal You can output digital audio signals from this unit by connecting to an amplifier with digital input terminal, etc. and play back music. Connecting to an amplifier with digital input terminal Coaxial digital cable (not supplied) Optical digital audio cable (not supplied) Amplifier with digital input terminal, etc. •• For details, refer to the operating instructions of the connected device.
Connections AC mains lead AC mains lead connection Connect only after all other connections are completed. AC mains lead (supplied) To a household mains socket •• Use only the supplied AC mains lead. •• Insert the plugs of the cables to be connected all the way in. •• Do not bend cables at sharp angles. •• “Wi-Fi” function switching screen is displayed following “Wi-Fi Setup” when this unit is turned on. If you stop the Wi-Fi setting, set to “Off” and press [OK].
Connections Network settings You can stream online music services or music files from your smartphone/tablet to this unit. To use these features, this system must join the same internet-connected network as the compatible device. This unit can be connected to a router using a LAN cable or built-in Wi-Fi®. For a stable connection to the network, a wired LAN connection is recommended.
Wired LAN connection LAN cable (not supplied) Broadband router, etc. 1 Disconnect the AC mains lead. 2 Connect this unit to a broadband router, etc. using a LAN cable. 3 Connect the AC mains lead to this unit. (⇒ 27) 4 Press [NWP ] to turn this unit on. 5 Make sure to set up a connection using “Google Home” app on your smartphone/tablet. •• When the connection is established, “ displayed. ” is Note •• While the AC mains lead is disconnected, the LAN cable must be connected or disconnected.
Wireless LAN connection ■■Preparation Disconnect the AC mains lead. Disconnect the LAN cable. Place this unit as close to the wireless router as possible. Point up the antenna on the rear of this unit as shown in the figure. Connect the AC mains lead to this unit. (⇒ 27) Note •• Do not perform the following: Applying too much force to the antenna Carrying this unit by holding the antenna •• After turning on this unit, it may take some time until this unit is activated.
Network setting for the first time using the “Google Home” app 1 Press [NWP ] to turn this unit on. •• “Wi-Fi Setup” is displayed. 2 Press [NWP]. 3 Press [ ], [ ] to select “On” and press [OK] on the “Wi-Fi” screen. (It enables the Wi-Fi function) 4 Start the “Google Home” app and follow the on-screen instructions. Note •• This unit will be displayed as “TechnicsSL-G700-****” if the device name is not set. (“****” stands for characters unique to each set.
4 Press [ ], [ ] to select “On” and then press [OK]. (The wireless LAN function is enabled.) 5 Press [ ], [ ] to select “WPS Push” and then press [OK]. •• “WPS” blinks. Complete step 6 within 2 minutes. 6 After “WPS” is displayed, press the WPS button on the wireless router. Example: •• “Linking” blinks. •• When the connection is established, “Success” is displayed. “Fail” may be displayed if the connection was not complete. Try this method again from the setup menu.
5 Press [ ], [ ] to select “WPS PIN” and then press [OK]. •• The PIN code is displayed. Complete step 6 within 2 minutes. 6 Enter the PIN code into the wireless router from PC, etc. •• “Linking” blinks. •• When the connection is established, “Success” is displayed. “Fail” may be displayed if the connection was not complete. Try this method again from the setup menu. If “Fail” is still displayed, try other methods. 7 Press [OK] to exit the setting.
6 Start the app and follow the on-screen instructions. •• When the connection is established, “Success” is displayed. “Fail” may be displayed if the connection was not complete. Try this method again from the setup menu. If “Fail” is still displayed, try other methods. 7 Press [OK] to exit the setting. Note •• This unit will be displayed as “TechnicsSL-G700-****” if the device name is not set. (“****” stands for characters unique to each set.
This unit’s name on the network “Friendly Name” You can change this unit’s name on the network (e.g. “Room 1” or “Living Room” etc.). 1 Press [NWP]. 2 Press [SETUP]. 3 Press [ ], [ ] repeatedly to select “Network” and then press [OK]. 4 Press [ ], [ ] repeatedly to select “Friendly Name” and then press [OK]. •• The current name of this unit is displayed. Press [OK] to edit. 5 Press [ ], [ ], [ ], [ ] to input the friendly name. •• Only ASCII characters can be used.
To make network-related settings You can set specific IP address, subnet mask, default gateway, primary DNS, etc. (If your network requires specific settings, disable DHCP.) •• Do not play back music while changing these settings. 1 Press [NWP]. 2 Press [SETUP]. 3 Press [ ], [ ] repeatedly to select “Network” and then press [OK]. 4 Select and input the details. 5 Press [OK] to apply the settings. 6 Press [RETURN] to exit the settings. 7 Press [NWP ] to switch the unit to standby.
Operations Playing back CD/SACD.......................... 39 Operations during playback....................... 39 Repeat playback......................................... 40 Random playback....................................... 40 Programme playback..................................41 Playing back Hybrid Super Audio CDs......... 42 MQA decoding.......................................... 42 Pure Disc Playback..................................... 44 Using USB device..................................
Playing Internet Radio and Podcasts.... 58 Operations during playback....................... 59 Repeat playback......................................... 59 Random playback....................................... 59 Adding a station to favourite list “Add Favourites”........................................ 60 Deleting the favourite station “Delete Favourites”.................................... 60 Operations using the dedicated app “Technics Audio Center”............................
Operations Playing back CD/SACD Insert the CD for music playback. •• Refer to “Notes on discs” (⇒ 104) for the discs this unit can play back. 1 Press [NWP ] to turn this unit on. 2 Press [>INPUT<] repeatedly to select “CD”. 3 Press [ ] on the unit to open the disc tray and insert a CD. •• Place label up in the proper position in the middle of the disc tray. 12 cm CD 8 cm CD DO DO NOT DO DO NOT •• Press [ ] again to close the disc tray. 4 Press [ ].
Repeat playback 1 Press [NWP]. 2 Press [ ]. “1 ”: Only plays the selected track. “ ”: All tracks are repeated. •• Setting contents are stored even when the input source is switched. Random playback 1 Press [NWP]. 2 Press [RND]. •• Press again to cancel. •• Setting contents are stored even when the input source is switched. •• During random playback, you cannot skip to the previous track.
Programme playback 1 Press [NWP]. 2 Press [PGM] in the stop mode. •• “Program Mode” screen is displayed. 3 Press the numeric buttons to select tracks. •• Repeat this step to make further selections. 4 Press [ ] to start playback. Stop Press [ ]. •• Programmed contents are stored. Check the programmed order Press [ mode. Add tracks Do step 3 in the stop mode. Clear the last track Press [CLEAR] in the stop mode. •• You cannot select and clear a desired programmed track.
Playing back Hybrid Super Audio CDs Hybrid Super Audio CD discs include a conventional CD layer along with the Super Audio CD layer. Although Super Audio CD layer is preferentially played back, you can select the CD layer or Super Audio CD layer for playback by pressing [CD] while the playback stops. Note •• Audio signal of Super Audio CD and Super Audio CD layer of Hybrid Super Audio CD cannot be output from the digital audio output terminal of this unit.
Note •• “MQA” or “MQA Studio” indicates that the unit is decoding and playing an MQA stream or file, and denotes provenance to ensure that the sound is identical to that of the source material. “MQA Studio” indicates it is playing an MQA Studio file, which has either been approved in the studio by the artist/producer or has been verified by the copyright owner. •• MQA files or streams may not be decoded to deliver the master quality audio depending on the setting of the connected digital audio device.
Pure Disc Playback By disabling the network functions, etc. this unit operates exclusively for the playback of CD/SACD for the higher quality sound. 1 Press [CD] for 5 seconds or longer. •• A confirmation screen appears. 2 Press [OK]. 3 Press [ ], [ ] to select “Yes” and then press [OK]. •• Playback of the online music streaming services, music files from network devices, etc. cannot be available while “Pure Disc Playback” is enabled. •• You can also set “Pure Disc Playback” to “On” from the setup menu.
Operations Using USB device You can connect a USB device to the unit and play back music stored on the USB device. •• Refer to “USB” (⇒ 105) for information about the USB device this unit can play back. USB device 1 Connect a USB device to the USB-A terminal (USB Front) on the front of this unit. 2 Press [NWP]. 3 Press [>INPUT<] repeatedly to select “USB Front”. •• You can also select the input source by turning the multi control knob after pressing [INPUT] on the unit.
Operations during playback Stop [ Pause [ ] •• Press again to resume. Skip [ ][ ] Search [ ][ ] View available information [INFO] •• Press repeatedly to switch the information. ] •• This operation may not be available for some formats. Repeat playback 1 Press [NWP]. 2 Press [ ]. “1 ”: Only plays the selected track. “ ”: All tracks are repeated. •• Setting contents are stored even when the input source is switched. Random playback 1 Press [NWP]. 2 Press [RND]. •• Press again to cancel.
Using a USB HDD When using a USB HDD with this unit, connect a USB HDD to the USB-A terminal (USB Rear) on the rear of this unit and switch the input source to “USB Rear”. Note •• Do not connect a USB HDD to the USB-A terminal (USB Front) on the front of this unit. Add a track to playlist You can add your favourite track to playlist. 1 Press [NWP]. 2 Press [ ], [ ] to select a track to add. 3 Press [MENU]. 4 Press [ ], [ ] to select “Add to Playlist” and then press [OK].
Deleting the track from playlist 1 Press [NWP]. 2 Press [ ], [ ] to select “Playlist” and then press [OK]. 3 Press [ ], [ ] to select a track to delete. 4 Press [MENU]. 5 Press [ ], [ ] to select “Delete One” and then press [OK]. •• Select “Delete All” and press [OK] to delete all tracks from playlist. •• “Deleted” is displayed after deleting. •• “Empty” is displayed if no track is registered to the playlist.
Operations Using digital audio output device You can connect a digital audio output device with coaxial digital cable (not supplied) or optical digital audio cable (not supplied) to this unit and play back music. Optical digital audio cable (not supplied) Coaxial digital cable (not supplied) Digital audio output device 1 Disconnect the AC mains lead. 2 Connect this unit and a digital audio output device. 3 Connect the AC mains lead to this unit. (⇒ 27) 4 Press [NWP ] to turn this unit on.
Note •• When enjoying video contents with this function, the video and audio output may not be synchronised. •• The digital audio input terminals of this unit can only detect the following linear PCM signals. For details, refer to the operating instructions of the connected device. Sampling frequency: Coaxial digital input 32/44.1/48/88.2/96/176.4/192 kHz Optical digital input 32/44.1/48/88.
Operations Using Bluetooth® You can listen to the sound from the Bluetooth® audio device from this unit wirelessly. •• Refer to the operating instructions of the Bluetooth® device for details. Bluetooth® device Pairing a Bluetooth® device ■■Preparation •• Turn on the Bluetooth® device and place the device near this unit. •• Make sure that the Bluetooth® feature is activated on the device. ■■Registering the Bluetooth® device 1 Press [NWP]. 2 Press [>INPUT<] repeatedly to select “Bluetooth”.
■■Connecting the paired Bluetooth® device 1 Press [>INPUT<] repeatedly to select “Bluetooth”. •• If another Bluetooth® device is already connected with this unit, disconnect from the Bluetooth® device. 2 Open the Bluetooth® connection screen, etc. on the Bluetooth® device, and select “Technics-SL-G700-****”*1, 2. •• If the device name is set on the “Google Home” app, the set name is displayed. 3 Play music by operating the Bluetooth® device. Note •• If prompted for the passkey, input “0000”.
Disconnecting a Bluetooth® device 1 Press [NWP]. 2 Press [MENU]. 3 Press [ ], [ ] repeatedly to select “Disconnect?” and then press [OK]. 4 Press [ ], [ ] to select “Yes” and then press [OK]. Note •• The Bluetooth® device will be disconnected if a different audio source is selected. Bluetooth® transmission mode If a Bluetooth® device is already connected, disconnect it. 1 Press [NWP]. 2 Press [MENU]. 3 Press [ ], [ ] repeatedly to select “Link Mode” and then press [OK].
Operations Playing back music files on the media server You can share music files stored in the media server (PC, Network Attached Storage, etc.) connected to your home network, and enjoy the contents with this unit. ■■Preparation •• Complete the network settings. (⇒ 28) •• Connect the device to be used to the network of this unit. •• To use Windows Media® Player Add the contents and folder to the libraries of the Windows Media® Player 11 or 12, or a smartphone, etc.
Playing back content stored on the media server by controlling it from this unit 1 Press [NWP]. 2 Press [>INPUT<] repeatedly to select “DMP”. •• You can also select the input source by turning the multi control knob after pressing [INPUT] on the unit. •• The server selection screen will be displayed. 3 Press [ ], [ ] to select a media server on the network, and then press [OK]. •• The folder/content selection screen will be displayed. Repeat this step to make further selections.
Repeat playback 1 Press [NWP]. 2 Press [ ]. “1 ”: Only plays the selected track. “ ”: All tracks are repeated. •• Setting contents are stored even when the input source is switched. Random playback 1 Press [NWP]. 2 Press [RND]. •• Press again to cancel. •• During random playback, you may not skip to the previous track. •• During random playback, tracks may be played more than once. •• Setting contents are stored even when the input source is switched.
Playing back content stored on the media server by controlling it from a DMC By controlling a DMC (Digital Media Controller) compatible device, you can play back music stored on the media server on this unit (DMR—Digital Media Renderer). Operate the DMC compatible device and connect to this unit. •• The device name of this unit will be displayed as “Technics-SL-G700-****”*1, 2. •• For details on how to use DMC compatible devices, refer to the operating instructions of the devices or the software.
Operations Playing Internet Radio and Podcasts This unit supports an audio broadcasting service transmitted via the Internet, and Internet Radio and Podcasts can be played back. ■■Preparation •• Complete the network settings. (⇒ 28) Make sure that the network is connected to the Internet. 1 Press [NWP]. 2 Press [>INPUT<] repeatedly to select “Internet Radio” / “Podcasts”. •• You can also select the input source by turning the multi control knob after pressing [INPUT] on the unit.
Operations during playback Stop [ Pause (Podcasts) [ ] •• Press again to resume. Skip [ ][ ] Search (Podcasts) [ ][ ] ] Repeat playback 1 Press [NWP]. 2 Press [ ]. “1 ”: Only plays the selected track. “ ”: All tracks are repeated. •• Setting contents are stored even when the input source is switched. •• Repeat playback is not available for the content of “Internet Radio”. Random playback 1 Press [NWP]. 2 Press [RND]. •• Press again to cancel.
Adding a station to favourite list “Add Favourites” 1 Press [NWP]. 2 Press [ ], [ ] to select a station and then press [OK]. 3 Press [MENU]. 4 Press [ ], [ ] repeatedly to select “Add Favourites” and then press [OK]. •• “Added” is displayed after registering. •• You cannot add the already registered station. (“Already Exists” is displayed.) Deleting the favourite station “Delete Favourites” 1 Press [NWP]. 2 Press [ ], [ ] to select a station to delete from the favourite list. 3 Press [MENU].
Operations Playing audio using Spotify Connect This unit is compatible with Spotify Connect for the online music service (Spotify). You can play music from the music streaming service of Spotify by operating your smartphone, tablet, etc. ■■Preparation •• Complete the network settings. (⇒ 28) Make sure that the network is connected to the Internet. •• Connect the device to be used to the network of this unit. Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.
Note •• The device name of this unit will be displayed as “Technics-SL-G700-****”*1, 2. •• If the device name is set on the “Google Home” app, the set name is displayed. •• Registration/subscription is required. •• Services, icons, and specifications are subject to change. 1: * “****” stands for a number that is unique to each set. *2: The device name can be changed from “This unit’s name on the network”.
Operations Using TIDAL You can play music from the music streaming service, TIDAL on this unit with the dedicated application “Technics Audio Center” (free of charge) on your smartphone, tablet, etc. For details of TIDAL, visit the following website. www.tidal.com ■■Preparation •• Install the latest “Technics Audio Center” on your device (smartphone, tablet, etc.). For details, visit: www.technics.
1 Press [NWP]. 2 Press [>INPUT<] repeatedly to select “TIDAL”. •• You can also select the input source by turning the multi control knob after pressing [INPUT] on the unit. •• When TIDAL is used for the first time, “Operate via App” is displayed. Use the dedicated app “Technics Audio Center” for operating. 3 Press [ ], [ ] to select an item and then press [OK]. •• Repeat this step to make further selections. •• Press [RETURN] to return to the previous folder.
Random playback 1 Press [NWP]. 2 Press [RND]. •• Press again to cancel. •• During random playback, you may not skip to the previous track. •• Setting contents are stored even when the input source is switched. Adding a track/album/artist, etc. to favourite list “Add Favourites” 1 Press [NWP]. 2 Press [ ], [ ] to select a content to add and then press [OK]. •• Repeat this step to make further selections. •• Press [RETURN] to return to the previous folder.
Operations using the dedicated app “Technics Audio Center” You start the playback using “Technics Audio Center” on your tablet/smartphone. •• If you select TIDAL from “Technics Audio Center” on your tablet/smartphone, the input is automatically switched to TIDAL. •• For details, visit: www.technics.
Operations Using Deezer You can play music from the music streaming service, Deezer on this unit with the dedicated application “Technics Audio Center” (free of charge) on your smartphone, tablet, etc. For details of Deezer, visit the following website. www.deezer.com ■■Preparation •• Install the latest “Technics Audio Center” on your device (smartphone, tablet, etc.). For details, visit: www.technics.
1 Press [NWP]. 2 Press [>INPUT<] repeatedly to select “Deezer”. •• You can also select the input source by turning the multi control knob after pressing [INPUT] on the unit. •• When Deezer is used for the first time, “Operate via App” is displayed. Use the dedicated app “Technics Audio Center” for operating. 3 Press [ ], [ ] to select an item and then press [OK]. •• Repeat this step to make further selections. •• Press [RETURN] to return to the previous folder.
Random playback 1 Press [NWP]. 2 Press [RND]. •• Press again to cancel. •• During random playback, you may not skip to the previous track. •• Setting contents are stored even when the input source is switched. Adding a track/album/artist, etc. to favourite list “Add Favourites” 1 Press [NWP]. 2 Press [ ], [ ] to select a content to add and then press [OK]. •• Repeat this step to make further selections. •• Press [RETURN] to return to the previous folder.
Operations using the dedicated app “Technics Audio Center” You start the playback using “Technics Audio Center” on your tablet/smartphone. •• If you select Deezer from “Technics Audio Center” on your tablet/smartphone, the input is automatically switched to Deezer. •• For details, visit: www.technics.
Operations Listening to music using Chromecast-enabled app This unit is compatible with Chromecast-enabled apps. For detailed information of Chromecastenabled apps, visit: g.co/cast/apps ■■Preparation •• Complete the network settings. (⇒ 28) Make sure that the network is connected to the Internet. •• Install a Chromecast-enabled app on your device (smartphone, tablet, etc.). •• Connect the device to the network currently used at home.
Important notice: Before you dispose of or transfer this unit to a third party, be sure to log out of your music streaming services accounts to prevent unauthorised use of your accounts.
Operations Using AirPlay You can play back music stored on iOS device, etc. using AirPlay. ■■Preparation •• Complete the network settings. (⇒ 28) •• Connect the iOS device or PC to the same network as this unit. 1 (iOS device) Start the “Music” (or iPod) app. (PC) Start “iTunes”. 2 Select “Technics-SL-G700-****”*1, 2 from ). the AirPlay icon (e.g. •• If the device name is set on the “Google Home” app, the set name is displayed. 3 Start play. •• Check the volume settings before starting the playback.
Operations during playback Pause [ ][ •• Press [ Skip [ View available information [INFO] •• Press repeatedly to switch the information. ][ ] ] again to resume. ] •• You can also operate on the connected iOS device/PC. Note •• Volume changes on the iOS device or iTunes will apply to this unit. (Refer to the iTunes Help for the required settings in iTunes.) •• Playback of other audio sources will stop and AirPlay output will have priority.
Settings Sound adjustment................................ 77 Adjusting the volume of headphones “PHONES VOL”.......................................... 77 Using this unit exclusively for the playback of CDs “Pure Disc Playback”.................................. 77 MQA decoding “MQA Decoding”....................................... 78 Enabling the native playback for DSD signal “DSD Native”............................................. 78 Disabling audio output “Digital Output”/“Analog Output”.............
Checking the firmware version “F/W Version”............................................ 83 Firmware updates “F/W Update”............................................ 83 Using the favourite function................ 86 Registering your favourite station or playlist....................................................... 86 Calling up the favourite station.................. 86 Deleting the favourite station or playlist..... 87 Operations using the dedicated app “Technics Audio Center”...........................
Settings Sound adjustment 1 Press [NWP]. 2 Press [SETUP]. 3 Press [ ], [ ] repeatedly to select the menu and then press [OK]. 4 Press [ ], [ ], [ ], [ ] to set, and press [OK]. •• You can also enter a setup screen by pressing and holding multi control knob on the unit. (Use the remote control for setting some items.) Adjusting the volume of headphones “PHONES VOL” You can adjust the volume of headphones. (⇒ 17) •• -- dB (min), -99.0 dB to 0 dB (max) •• The factory default is “-60.0 dB”.
MQA decoding “MQA Decoding” An MQA file or stream needs to be decoded to deliver the master quality audio. Switch the MQA decoding function to “On” or “Off”. (⇒ 42) •• The factory default is “Off”. Enabling the native playback for DSD signal “DSD Native” Enabling the native playback for DSD signal from the USB device or network device. •• The factory default is “Off”. •• The setting cannot be changed while playing back the USB device or network device.
Setting the analogue audio output “A.Output Level” You can set the analogue audio output level is fixed or adjustable when changing the volume with this unit. (⇒ 25) •• The factory default is “Fixed”. •• The factory default of the analogue audio output level is “-60.0 dB” when setting to “Variable”. •• -- dB (min), -99.0 dB to 0 dB (max) •• Set “Analog Output” to “On” to use this function.
Playing back CD more naturalsounding audio Re-mastering expands the playback band and achieves a higher bit depth to reproduce natural and expansive sounds close to original music sources. 1 Press [NWP]. 2 Press [RE-MASTER]. •• The factory default is “Off”. •• When setting the MQA decoding function to “On”, the Re-master function will be set to “Off”. Direct mode This unit can transmit input signals without performing digital signal processing (DSP).
Settings Other settings 1 Press [NWP]. 2 Press [SETUP]. 3 Press [ ], [ ] repeatedly to select the menu and then press [OK]. 4 Press [ ], [ ], [ ], [ ] to set, and press [OK]. •• You can also enter a setup screen by pressing and holding multi control knob on the unit. (Use the remote control for setting some items.) Sleep timer “SLEEP” The sleep timer can turn the unit to standby mode after a set time. (30 minutes/60 minutes/ 90 minutes/120 minutes/Off) •• “SLEEP” is displayed after setting.
Auto off function “AUTO OFF” While the setting is set to “On”, this unit automatically enters standby mode for saving energy, if no sound output without operation such as pressing buttons, etc. for approx. 20 minutes. •• The factory default is “On”. To disable this function, select “Off”. Note •• The setting is stored even if the power is turned off and on. •• “AUTO OFF” is displayed 3 minutes before this unit is turned off.
Wi-Fi signal strength “Signal Level” To check the Wi-Fi signal strength where this system is located. •• The signal strength is shown as 3 (max) - 2 - 1. If the indicator shows “2” or “1”, change the position or angle of your wireless router or this system, and see if the connection improves. •• If “0” is displayed, this system cannot establish a link with the wireless router.
Note •• During the update process, no other operations can be performed. •• If there are no updates, “Firmware is Up To Date” is displayed. (No need to update it.) •• Updating the firmware may reset the settings of this unit. Update via Internet ■■Preparation •• Connect this unit to the network. (⇒ 28) Make sure that the network is connected to the Internet. 1 Press [NWP]. 2 Press [SETUP]. 3 Press [ ], [ ] repeatedly to select “F/W Update” and then press [OK].
3 Press [SETUP]. 4 Press [ ], [ ] repeatedly to select “F/W Update” and then press [OK]. 5 Press [ ], [ ] to select “USB Front” and then press [OK]. 6 Press [ ], [ ] to select “Yes” and then press [OK]. •• The progress is displayed as “Updating %” while updating. (“ ” stands for a number.) •• When the update has finished successfully, “Success” is displayed. 7 Press [ ] on the unit to turn this unit off and on. Note •• Downloading may take longer depending on the USB flash memory.
Settings Using the favourite function Registering your favourite station or playlist You can register your favourite station or playlist (USB Front / USB Rear / DMP / Internet Radio / Spotify / TIDAL / Deezer, etc.) and call up the station. 1 Press [NWP]. 2 Switch the input source (USB Front / USB Rear / DMP / Internet Radio / Spotify / TIDAL / Deezer, etc.). 3 Press and hold [PGM] for approx. 3 seconds while the playback screen is displayed. •• The favourite registering screen (FAV) is displayed.
Note •• If the station or playlist cannot be found after the input source is switched, playback does not start or other music may play back. Deleting the favourite station or playlist 1 Press [NWP]. 2 Press and hold [PGM]. 3 Press [ ], [ ] repeatedly to select a favourite number to delete and then press [CLEAR]. 4 Press [ ], [ ] repeatedly to select “Yes” and then press [OK]. •• “Cleared” is displayed after deleting. •• “Empty” is displayed if no station or playlist is registered to the favourite list.
Settings System control connection You can operate this unit and Technics devices supporting system control function (Stereo Integrated Amplifier, etc.) simultaneously with ease on the remote control. For details, refer to the operating instructions of each device. Analogue audio cable (supplied) * System connection cable Amplifier with unbalanced input terminals Stereo Integrated Amplifier, etc.
Using system connection cable and audio cable 1 Disconnect the AC mains lead. 2 Connect this unit and Technics device supporting system control function (Stereo Integrated Amplifier, etc.). •• Use both of the system connection cable and the audio cables when connecting this unit and the device. •• Use the system connection cable supplied with the connected device. 3 Connect the AC mains lead to this unit. (⇒ 27) 4 Press [NWP ] to turn this unit on.
Adjusting BASS/MID/TREBLE “Tone Control” You can adjust the tone of the SU-C700 with this unit. Each tonal range (BASS/MID/TREBLE) can be adjusted. 1 Press [NWP]. 2 Press [SETUP]. 3 Press [ ], [ ] repeatedly to select “Tone Control” and then press [OK]. 4 Press [ ], [ ] to set, and press [OK]. •• To enable this function, select “On (adjustment)”. •• Each level can be adjusted between “- 10” and “+ 10”.
Others Troubleshooting.................................... 92 Heat buildup of this unit............................. 92 Do you have the latest firmware installed?.................................................. 92 To restore all the settings to the factory defaults...................................................... 93 General...................................................... 94 Disc............................................................ 96 USB..................................................
Others Troubleshooting Before requesting service, make the following checks. If you are uncertain about some of the check points, or if the solutions indicated in the following guide do not resolve the issue, then consult your dealer for instructions. Heat buildup of this unit This unit becomes warm while in use. •• Be careful when touching the bottom of this unit because the bottom of this unit may be hot. For installation or unit care, disconnect the AC mains lead, wait for at least 3 minutes.
To restore all the settings to the factory defaults When the following situations occur, reset the memory: •• There is no response when buttons are pressed. •• You want to clear and reset the memory contents. 1 Press [NWP] while this unit is turned on. 2 Press [SETUP]. 3 Press [ ], [ ] repeatedly to select “Initialization” and then press [OK]. 4 Press [ ], [ ] to select “Yes” and then press [OK]. •• A confirmation screen appears. Select “Yes” in the following steps to restore all the settings to defaults.
General The unit does not work. Operations are not done properly. •• One of the unit’s safety devices, etc. may have been activated. Press [ ] on the unit to switch the unit to standby. •• If the unit does not switch to standby, press [ ] on the unit for at least 5 seconds. The unit is forcibly switched to standby. Alternatively, disconnect the AC mains lead, wait for at least 3 minutes, then reconnect it. Press [ ] on the unit to switch on. (It may take some time for this unit to be turned on.
Playback does not start. •• Depending on your environment or connected devices, it may take some time. •• Check to see if the format of the file is supported. For supported formats, refer to “File format”. (⇒ 113) The unit turns to standby mode automatically. •• Is the auto off function turned on? (⇒ 82) •• This unit may turn to standby mode simultaneously with the connected device with the system control function. (⇒ 89) The settings are reset to the factory defaults.
Disc Incorrect display or play does not start. •• Make sure that the disc is compatible with this unit. (⇒ 104) •• There is moisture on the lens. Wait for about an hour and then try again. •• Unfinalised CD-R and CD-RW cannot be played back. •• WMA/MP3 is not supported. Refer to “Notes on discs” (⇒ 104) for information about the discs this unit can play back. Playback takes time to start. •• It may take some time for the disc to load if there are a lot of tracks on it.
Bluetooth® Pairing cannot be completed. •• Check the Bluetooth® device condition. The device cannot be connected. •• The pairing of the device was unsuccessful or the registration has been replaced. Try re-pairing the device. (⇒ 51) •• This unit might be connected to a different device. Disconnect the other device and try re-pairing the device. The device is connected, but audio cannot be heard through this unit.
Network Cannot connect to the network. •• Confirm the network connection and settings. (⇒ 28) •• If the network is set to be invisible, make the network visible while you set up the network for this unit or make a wired LAN connection. •• This system’s Wi-Fi security supports WPA2™. Your wireless router must therefore be WPA2™ compatible. For details on the security supported by your router and how to change the settings, please refer to the operating instructions or contact your internet service provider.
Playback does not start. The sound is interrupted. •• The content may not be played back properly depending on the network condition. •• If using the 2.4 GHz band on the wireless router, simultaneous use with other 2.4 GHz devices, such as microwaves, cordless telephones, etc., may result in connection interruptions. Increase the distance between this unit and these devices. If your wireless router supports 5 GHz band, try using the 5 GHz band.
Spotify/TIDAL/Deezer/ Internet Radio/Podcasts Playback does not start. The sound is interrupted. •• The station that does not broadcast cannot be played back (or it will be skipped). •• The internet radio station may not be played back depending on the broadcasting method or the network condition. •• The content may not be played back properly depending on the network condition. •• Depending on the internet connection environment, the sound may be interrupted or it may take some time to play back.
Messages AUTO OFF The unit has been left unused for about 20 minutes and will shut down within a minute. (⇒ 82) Press any button to cancel it. Checking Device The unit is checking the connected USB device. •• After this display has disappeared, start operating. Download Fail The firmware download has failed. The network is not connected to the internet. •• Press any button to exit. Please try again later. •• The server cannot be found. Press any button to exit.
“F ” (“ ” stands for a number.) An abnormality has occurred. (If this unit detects an abnormality, the protection circuit is activated, and the power may be turned off automatically.) •• Is this unit placed in an extremely hot place? •• Wait a few seconds and then turn the unit on again. (The protection circuit will be deactivated.) If the problem persists, write down the displayed number, disconnect the AC mains lead and consult your dealer. Load Fail The firmware cannot be found on the USB flash memory.
Please Wait This is displayed, for example, when this unit is turned to standby/on. (For up to approx. 1 minute and 30 seconds) •• Wait for the display disappears. Reading The unit is checking the CD information. •• After this display has disappeared, start operating. “Remote ” (“ ” stands for a number.) The remote control and this unit are using different modes. •• Change the mode on the remote control. (⇒ 22) Searching The unit is checking the media server on the network.
Others Playable media Notes on discs ■■Disc formats supported by this unit Support (2-channel only) Super Audio CD (SACD) Commercially available CDs (CD-DA) Support CD-R/CD-RW (CD-DA) Support ■■Compatible CD •• A disc with the CD Logo. •• This unit can play back discs that conform to the CD-DA format. •• The unit may not be able to play some discs due to the condition of the recording. •• Before playback, finalise the disc on the device it was recorded on.
USB •• This unit does not guarantee connection with all USB devices. •• FAT16, FAT32 and NTFS file systems are supported. •• This unit supports USB 2.0 high speed. •• USB devices may not be recognised by this unit when connected using the following: a USB hub a USB extension cable •• It is not possible to use USB card reader/writers. •• This unit cannot record music to a USB device. •• Not all files on the USB device may be read if there are some files not supported.
Others About Bluetooth® Panasonic bears no responsibility for data and/ or information that is compromised during a wireless transmission. Frequency band used •• This system uses the 2.4 GHz frequency band. Certification of this device •• This system conforms to frequency restrictions and has received certification based on frequency laws. Thus, a wireless permit is not necessary. •• The actions below are punishable by law in some countries: Taking apart or modifying the system.
Others Licenses The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance ®. The Wi-Fi Protected Setup™ Logo is a certification mark of Wi-Fi Alliance ®. Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple, and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries.
“DSD” is a registered trademark. FLAC Decoder Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Josh Coalson Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Others Specifications ■■GENERAL Power supply AC 220 V to 240 V, 50/60 Hz Power consumption 38 W Power consumption in standby mode (Network Standby Off) Approx. 0.3 W Power consumption in standby mode (Network Standby On with Wired LAN) Approx. 1.9 W Power consumption in standby mode (Network Standby On with Wireless LAN) Approx. 1.7 W Dimensions (W×H×D) 430 mm × 98 mm × 407 mm Mass Approx. 12.
■■DISC SECTION Disc played (8 cm or 12 cm) Super Audio CD (2ch area only), CD, CD-R, CD-RW Pick up Wavelength 650 nm (Super Audio CD), 790 nm (CD) Laser power CLASS 1 Audio Output (Disc) 2ch (FL, FR) Format Super Audio CD, CD-DA NORSK Bølgelengde 650 nm (Super Audio CD), 790 nm (CD) Laserstyrke Ingen farlig stråling sendes ut ■■Bluetooth® SECTION Bluetooth® system specification Bluetooth® Ver.4.2 Wireless equipment classification Class 2 (2.
■■TERMINALS SECTION Headphones Jack Stereo, φ6.3 mm 110 mW, 32 Ω (VOL MAX) USB (Front/Rear) Type A Connecter USB 2.
■■FORMAT SECTION USB-A USB Standard USB 2.0 high-speed USB Mass Storage class ■■Wi-Fi SECTION Standard IEEE802.11a/b/g/n/ac Frequency band 2.4 GHz band 5 GHz band Security WPA2™, Mixed mode WPA2™/WPA™ WPS version Version 2.0 •• The WLAN feature of this product shall exclusively be used inside buildings.
■■File format This unit supports the following file formats. •• This unit does not support the playback of copyprotected music files. •• Playback of all files in formats supported by this unit is not guaranteed. •• Playback of a file in a format not supported by this unit may cause choppy audio or noise. In such cases, check to see if this unit supports the file format. •• This unit does not support VBR (Variable Bit Rate) playback.
Extension MP3 .mp3 32/44.1/ 48 kHz 16 to 320 kbps AAC .m4a .aac 32/44.1/48/ 88.2/96 kHz 16 to 320 kbps .wav 32/44.1/48/ 88.2/96/ 176.4/192/ 352.8/384 kHz 16/24/32 bit .flac 32/44.1/48/ 88.2/96/ 176.4/192/ 352.8/384 kHz 16/24 bit .aiff 32/44.1/48/ 88.2/96/ 176.4/192/ 352.8/384 kHz 16/24/32 bit ALAC .m4a 32/44.1/48/ 88.2/96/ 176.4/192/ 352.8/384 kHz 16/24 bit DSD .dff .dsf 2.8/5.6/ 11.
EU Headquarter Address: Panasonic Corporation Kadoma, Osaka, Japan Importer for Europe: Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany Panasonic Corporation Web Site: http://www.panasonic.
