User Manual

English
09
(09)
Control reference guide
  
    
01 [ ] Standby/on button
 Press to switch the unit from on to standby
mode or vice versa. In standby mode, the
unit is still consuming a small amount of
power.
02 Power indicator
 Blue: The unit is on.
 Red: The unit is in standby mode.
 Off: The unit is off.
03 Headphones jack
 Excessive sound pressure from earphones
and headphones can cause hearing loss.
 Listening at full volume for long periods
may damage the user’s ears.
04 USB-A terminal (USB-A Front)
(For AV) (DC 5 V
500 mA)
 You can connect a USB device to the unit
and play back music stored on the USB
device. ( 18)
 You can connect the USB flash memory
with new firmware and update the
firmware for this unit.
For details, refer to the following website.
www.technics.com/support/firmware/
05 Remote control signal sensor
 Reception distance:
Within approx. 7 m directly in front
 Reception angle:
Approx. 30° left and right
06 Disc tray
( 17)
07 Display
 Input source, playback status, etc. are
displayed.
08 [
] Open or close the disc tray
09 Playback operation buttons
(e.g. “CD”)
Stop [ ]
Play/Pause
[
]
 Press again to resume.
Skip [
] [ ]
Search
Press and hold [
] or
[ ].
10 Multi-control knob
 Turn this knob clockwise or anticlockwise
to switch the input source and scroll
through items.
 To set an item, press the knob; to enter the
setup screen, press and hold it.
11 Input selector button
 Switch the input source.
12 Headphone volume button
 Headphone volume is displayed. (Volume
can be adjusted with the multi-control
knob while displaying.)
 -- dB (min), -99.0 dB to 0 dB (max)
This unit (front)