User Manual
Table Of Contents
- 0-basic_sl_g700m2e-0_Eng_0921-2_trim
- 1-basic_sl_g700m2e_Deu_0921-3_trim
- 2-basic_sl_g700m2e_Fra_0921-2_trim
- 3-basic_sl_g700m2e_Ita_0921-2_trim
- 4-basic_sl_g700m2e_Nld_0921_trim
- 5-basic_sl_g700m2e_Esp_0921-2_trim
- 6-basic_sl_g700m2e_Swe_0921-2_trim
- 7-basic_sl_g700m2e_Dnk_0921_trim
- 8-basic_sl_g700m2e_Fin_0926_trim
17
English
  Playback
 (17)
 Basic
  Playing back CD/SACD
 1 Press [NWP  ]/[CD  ] to turn this 
unit on.
 2 Press [ ] to open the disc tray and 
insert a CD.
 Place label up in the proper position in the 
middle of the disc tray.
   DO  DO NOT
 12 cm CD
DO
DO
NOT
   DO  DO NOT
 8 cm CD
DO
DO
NOT
   Press [ ] again to close the disc tray.
 3 Press [
].
 Note
   Be careful not to get your finger caught in the 
disc tray when opening/closing it.
■  Repeat Playback
 Press [CD].
 Press [ ].
 “1
”:
 Only plays the selected track.
 “ ”:
 All tracks are repeated.
■ Random playback
 Press [CD].
 Press [RND].
   Press again to cancel.
■ Programme playback
 Press [CD].
 Press [PGM] in the stop mode.
   “Program Mode” screen is displayed.
 Press the numeric buttons to select tracks.
   Repeat this step to make further selections.
 Press [ ] to start playback.
   Press [
] or [ ] in the stop mode to check the 
programmed order.
   Press [CLEAR] in the stop mode to clear the 
last track.
   Press [PGM] in the stop mode to cancel the 
programme mode, and the programme 
memory will be stored.
   Press [
] in the stop mode and select “Yes” 
to cancel the programme mode. (The 
programme memory will be cleared.)
 Note
   The programme memory will be cleared in the 
following conditions.
 - When turning on/off this unit
 - when replacing the CD
 - when switching the layer
   The programme mode is cancelled when the 
random playback is set.
■ Playing back Hybrid Super Audio CDs
 Hybrid Super Audio CD discs include a 
conventional CD layer along with the Super 
Audio CD layer. Although Super Audio CD layer 
is preferentially played back, you can select the 
CD layer or Super Audio CD layer for playback by 
pressing [CD] while the playback stops.
 Note
   The layer cannot be selected on the disc except 
Hybrid Super Audio CD discs.
   “Super Audio CD” is displayed as an input 
source while Super Audio CD is played back.
■ Compatible CD
   A disc with the CD Logo.
   This unit can play back discs that conform to 
the CD-DA format.
   The unit may not be able to play some discs due 
to the condition of the recording.
   Before playback, finalise the disc on the device 
it was recorded on.
■ CDs that cannot be used
   CDs with irregular shapes, such as heart shapes 
(Use of such CDs may cause malfunction.)
■ CDs that are not guaranteed to operate 
with this unit
   Discs with illegally copied data and those that 
do not conform to industry standards
   DualDiscs (Discs that record data such as music 
and images on both sides)
■ Disc formats supported by this unit
 Super Audio CD (SACD)
 Support
 (2-channel only)
 Commercially available CDs 
(CD-DA)
 Support
 CD-R/CD-RW (CD-DA)  Support
■ This unit’s lens
 Use the lens cleaner (not supplied) to clean the 
unit’s lens.
■ Clean discs
 DO
 DO NOT
 Wipe with a damp cloth and then wipe dry with 
a dry cloth.










