Owner's Manual
Table Of Contents
- Operating Instructions
- Read first
- Table of contents
- Features
- Accessories
- Control reference guide
- Connections
- Operations
- Settings
- Sound adjustment
- Adjusting the volume of headphones "PHONES VOL”
- Using this unit exclusively for the playback of CDs "Pure Disc Playback”
- MQA decoding "MQA Decoding”
- Enabling the native playback for DSD signal "DSD Native”
- Disabling audio output "Digital Output”/“Analog Output”
- Setting the sampling frequency "D.Output fs”
- Setting the analogue audio output "A.Output Level”
- Adjusting the sound quality of analogue audio output "Filter”
- Setting the limitation ofheadphones output "PHONES VOL Limitation”
- Playing back CD more natural-sounding audio
- Direct mode
- Other settings
- Using the favourite function
- System control connection
- Sound adjustment
- Others
82
(Continued)
Auto off function
“AUTO OFF”
While the setting is set to “On”, this unit
automatically enters standby mode for saving
energy, if no sound output without operation such
as pressing buttons, etc. for approx. 20 minutes.
• The factory default is “On”. To disable this
function, select “Off”.
Note
• The setting is stored even if the power is turned
off and on.
• “AUTO OFF” is displayed 3 minutes before this unit
is turned off.
Network standby
“Network Standby”
This unit can turn on automatically from standby
mode when this unit is selected as the Spotify/
AirPlay/media server.
• The factory default is “Auto”. To disable this
function, select “Off”.
Auto:
Enables the network standby function when the
network connection is available.
On:
Always enables the network standby function.
Note
• If this function is set to “On” or “Auto”, the
standby power consumption will increase.
Network settings
“Network”
Wi-Fi setting
“Wi-Fi”
The wireless LAN function can be enabled or
disabled.
• The factory default is “On”.