Owner's Manual
Table Of Contents
- Operating Instructions
- Read first
- Table of contents
- Features
- Accessories
- Control reference guide
- Connections
- Operations
- Settings
- Sound adjustment
- Adjusting the volume of headphones "PHONES VOL”
- Using this unit exclusively for the playback of CDs "Pure Disc Playback”
- MQA decoding "MQA Decoding”
- Enabling the native playback for DSD signal "DSD Native”
- Disabling audio output "Digital Output”/“Analog Output”
- Setting the sampling frequency "D.Output fs”
- Setting the analogue audio output "A.Output Level”
- Adjusting the sound quality of analogue audio output "Filter”
- Setting the limitation ofheadphones output "PHONES VOL Limitation”
- Playing back CD more natural-sounding audio
- Direct mode
- Other settings
- Using the favourite function
- System control connection
- Sound adjustment
- Others
77
Settings
Sound adjustment
(Continued)
1 Press [NWP].
2 Press [SETUP].
3 Press [
], [ ] repeatedly to
select the menu and then press
[OK].
4 Press [
], [ ], [ ], [ ] to set,
and press [OK].
• You can also enter a setup screen by
pressing and holding multi control knob
on the unit. (Use the remote control for
setting some items.)
Adjusting the volume of
headphones
“PHONES VOL”
You can adjust the volume of headphones. (⇒ 17)
• -- dB (min), -99.0 dB to 0 dB (max)
• The factory default is “-60.0 dB”.
Using this unit exclusively for the
playback of CDs
“Pure Disc Playback”
By disabling the network functions, etc. this unit
operates exclusively for the playback of CD/SACD
for the higher quality sound. (⇒ 44)
• The factory default is “Off”.