Owner's Manual
Table Of Contents
- Operating Instructions
- Read first
- Table of contents
- Features
- Accessories
- Control reference guide
- Connections
- Operations
- Settings
- Sound adjustment
- Adjusting the volume of headphones "PHONES VOL”
- Using this unit exclusively for the playback of CDs "Pure Disc Playback”
- MQA decoding "MQA Decoding”
- Enabling the native playback for DSD signal "DSD Native”
- Disabling audio output "Digital Output”/“Analog Output”
- Setting the sampling frequency "D.Output fs”
- Setting the analogue audio output "A.Output Level”
- Adjusting the sound quality of analogue audio output "Filter”
- Setting the limitation ofheadphones output "PHONES VOL Limitation”
- Playing back CD more natural-sounding audio
- Direct mode
- Other settings
- Using the favourite function
- System control connection
- Sound adjustment
- Others
36
To make network-related settings
You can set specific IP address, subnet mask,
default gateway, primary DNS, etc. (If your network
requires specific settings, disable DHCP.)
• Do not play back music while changing these
settings.
1 Press [NWP].
2 Press [SETUP].
3 Press [
], [ ] repeatedly to select
“Network” and then press [OK].
4 Select and input the details.
5 Press [OK] to apply the settings.
6 Press [RETURN] to exit the settings.
7 Press [NWP
] to switch the unit to
standby.
• Wait until “Please Wait” disappears.
8 Perform the network setting. (⇒ 28)